2018 Microcar M 0.5L Petrol · P28 BAN

A consistent record of clean MOT results defines this vehicle's history, with no recorded defects or advisories across six consecutive testing cycles. The most recent inspection on 07 March 2026 confirms this trend of passing without any noted mechanical issues, maintaining a pattern of roadworthiness that has remained stable since the first recorded test in February 2021. The recorded mileage of 15,033 miles over approximately eight years indicates a very low annual usage rate of roughly 1,879 miles. This usage profile suggests the vehicle has been driven significantly less than the UK average, which typically results in less cumulative wear on drivetrain components, braking systems, and suspension linkages. However, such low annual accumulation can sometimes mean the vehicle has spent extended periods stationary, which may affect the condition of rubber seals and various fluid components. Because there are no recorded advisories for corrosion, leaks, or worn components, a physical inspection should focus on verifying that the lack of recorded defects translates to the vehicle's current mechanical state. During a test drive, pay close attention to the steering for any pulling or vibrations and listen for any knocks or rattles from the suspension bushes or coil springs when navigating uneven surfaces. Although no brake issues have been flagged, it is prudent to check for any pedal judder or uneven braking performance to ensure the discs and calipers are functioning correctly despite the low mileage. Given the low frequency of use, you should also inspect the vehicle for any signs of fluid weeping from the engine or gearbox, as seals can sometimes perish when not regularly lubricated by moving parts. Check that all exterior lighting and indicators are fully operational and that there are no signs of uneven tyre wear, which could indicate alignment issues. While the MOT history shows no structural or emissions failures, a thorough visual check of the underbody for any unexpected surface corrosion is a standard precaution for a vehicle with this usage pattern.