2008 Skoda Fabia 1.2L Petrol · PE58 LZU

The vehicle presents a roadworthy status, but the maintenance history reveals a reactive approach to repairs rather than preventative care. The most recent test in May 2025 at 92,161 miles secured a pass following a failure just five days prior. While the car currently clears the MOT, the record shows a recurring trend of neglecting minor electrical and mechanical components until they reach failure thresholds. The persistence of issues like worn track rod ends and suspension bushes across multiple years suggests that the owner only addresses faults when necessary to pass the annual inspection. At 18 years old, the recorded mileage of 92,161 miles is notably low, averaging approximately 5,120 miles per year. However, the data shows a significant spike in usage between May 2023 and May 2024, where the vehicle covered over 26,000 miles in a single year. This rapid accumulation of mileage explains the accelerated wear on rubber components and suspension bushings, such as the deteriorated anti-roll bar linkage and worn suspension arms noted during that period. The intervals suggest periods of low usage followed by bursts of heavy use. A buyer must inspect the front-end suspension thoroughly, as the record flags multiple failures involving track rod ends and suspension arm bushes. The 2025 failure regarding the exhaust lambda reading outside specified limits indicates a potential issue with the fuel-air mixture or a faulty oxygen sensor, which may be nearing the end of its operational life. Additionally, the presence of surface rust noted in 2023 requires scrutiny to ensure it has not progressed into structural corrosion on the sills or chassis. The history also highlights a consistent disregard for tyre maintenance, with multiple tyres flagged as worn to the legal limit in both 2023 and 2025. The 2023 failure also identified a torn CV boot and failed lamps, indicating a lack of basic pre-test checks. Before purchasing, verify the condition of the CV boots for grease leaks and check that the washer system and all lighting elements, particularly the previously failed nearside and offside stop lamps, are fully functional.