2007 Mazda 3 1.6L Petrol · PF07 SKJ
2007 Mazda 3 (1.6L, petrol). First registered 31 May 2007. Recorded mileage 136,841 miles. MOT expired on 10 Oct 2026. Taxed until 01 Sept 2027.
- Make & Model
- MAZDA 3
- Year / Origin
- 2007 · Preston
- Safety Recall
- Unknown
- MOT Status
- Expired on 10 Oct 2026
- Road Tax
- Taxed (01 Sept 2027)
- Recorded Mileage
- 136,841 mi
- ULEZ Compliance
- ULEZ Compliant (Euro 4+)
- Fuel & Engine
- Petrol · 1.6L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
PF07 SKJ Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 26/09/2025
- 136,841 miles recorded at latest MOT
- 1 historical MOT failure
- 1 defect noted at the latest MOT
- Recurring bodywork & corrosion items (6 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
PF07 SKJ MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 2007 Mazda 3 (PF07 SKJ) between October 2022 and September 2025.
The record contains 4 passes and 1 failure.
The most recent test on 26 September 2025 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Bodywork (6 issues), Brakes (4 issues), Suspension (2 issues), Tyres (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 19 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))”; “Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))”; “Offside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e))”.
PF07 SKJ Mileage History
- 10/10/2022125,876 mi
- 03/10/2023130,422 mi+4,546 mi
- 09/10/2024134,639 mi+4,217 mi
- 09/10/2024134,639 mi
- 26/09/2025136,841 mi+2,202 mi
Average of roughly 3,703 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Mazda Mazda 3 (BK)
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Buyer's Guide & Inspection Advisory
Expert automotive synthesis from historical MOT defect records and market benchmarks.
Our Verdict
Exercise significant caution before purc
If you proceed, prioritize a thorough inspection of the vehicle's underside. The 2024 MOT records indicate significant corrosion on the front and rear subframe mountings, the fuel tank strap, and various underbody components. You should ask for evidence that these areas have been treated or addressed to prevent further structural degradation.
Negotiate based on the documented history of suspension issues. The 2024 failure included a fractured nearside front coil spring and worn ball joints on both the anti-roll bar and lower suspension arm. Ensure all recent suspension work has been completed with quality parts and that the vehicle drives without knocks or rattles.
As a 1.6L petrol model, running costs are relatively standard for a non-premium hatchback. You can expect moderate fuel economy, though actual figures will depend on driving style and maintenance.
Insurance groups for 2007 Mazda 3 models vary, but typically sit in the mid-range. Maintenance costs may be higher than average due to the documented tendency for corrosion and the need for frequent suspension component replacements seen in this vehicle's history.
A critical inspection must focus on the chassis and subframes. The MOT history explicitly mentions corrosion on the front and rear subframe mountings, as well as the fuel tank strap. Use a torch to check for deep-seated rust versus surface rust, especially where the 2023 record noted 'general surface rust'.
Additionally, inspect the braking system and suspension. The 2024 record highlighted a corroded offside front upper brake pipe and several worn ball joints. Check the condition of the tyres, as the most recent 2025 MOT noted a nearside front tyre worn close to the legal limit. Finally, look for any signs of recent work on the coil springs to ensure the 2024 fracture has been fully rectified.
This 2007 blue Mazda 3 has covered 136,841 miles since its first registration in May 2007. The MOT history shows a pattern of increasing concerns, specifically regarding underbody corrosion and suspension wear. While the 2025 MOT was a pass, it noted tyre wear, following a much more extensive failure in 2024 involving multiple structural and mechanical defects.
Aggregate data for this model shows a 79.4% MOT pass rate, with common failures relating to headlamps, anti-roll bars, and brake pads.
Reviewed by the IsItAGoodCar editorial team — Verified automotive analysis synthesized from official vehicle registries.
Data Sources
DVSA
Official MOT test logs & failure reasons
DVLA
Tax, registration & powertrain specs
Experian
Finance, stolen markers & total loss
AI Analysis
Historical fault & advisory patterns
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (PF07 Series)
Vehicles registered in the same regional DVLA batch as PF07SKJ.
AUDI
A5
KIA
SEDONA
KIA
CEED
VOLVO
XC60 INSCRPT PRO B5 MHEV AWD A
KIA
SORENTO
KIA
PICANTO
KIA
SORENTO
KIA
SPORTAGE
KIA
CEED
KIA
PICANTO
KIA
SORENTO
KIA
SPORTAGE
MAZDA 3 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2007 model year cars.
- Rear Wheel Arch and Structural Sill CorrosionSerious
The first-generation Mazda 3 BK suffers from inadequate factory corrosion protection and seam sealing in key moisture-trap zones. UK winter road salt, road grit, and damp mud accumulate behind the rear wheel arch lip returns and plastic arch liners, allowing moisture to attack bare steel. Corrosion typically bubbles through the paint along the rear quarter panel arches and spreads into the structural rear inner sills, jacking points, and rear subframe mounting brackets. Advanced corrosion results in severe structural MOT failure, frequently rendering early UK survivors uneconomical to repair unless cut out and welded with fresh metal.
- Electro-Hydraulic Power Steering (EHPAS) Pump Failure and Assist LossSerious
Certain 1.6 and 2.0-litre petrol models employ an electro-hydraulic power steering (EHPAS) pump assembly mounted low down behind the offside front bumper. Road spray, moisture, and road salt cause corrosion inside the internal hydraulic pipework and sensor connectors. Rust particles contaminate the fluid pressure sensors, triggering the steering control module into a fail-safe mode that cuts power assistance abruptly while driving. Drivers experience suddenly heavy, unassisted steering, particularly alarming during low-speed parking or roundabout manoeuvres. The issue was subject to a major UK safety recall overseen by the DVSA, requiring pump replacement and line flushing.
- 1.6 MZ-CD Turbodiesel Oil Feed Carbon Clogging and Turbo FailureSerious
The 1.6-litre MZ-CD common-rail turbodiesel (co-developed with PSA) is notorious across UK used cars for premature turbocharger failure. Leaking copper fuel injector crush washers allow combustion gases to blow past into the engine crankcase, rapidly turning engine oil into sludgy carbon deposits. These carbon particles lodge in the microscopic gauze filter screen housed inside the turbocharger oil feed banjo bolt. Starved of clean oil flow, the turbo bearings overheat, produce a siren-like whine, and rapidly disintegrate, dumping metal shards into the intake and intercooler. A permanent fix requires injector resealing, sump drop, and banjo filter removal.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.