2019 Toyota Yaris Icon Tech VVT-I CVT 1.5L Petrol · PRZ 8314

The Toyota Yaris in question demonstrates a stable roadworthiness profile, with both MOT tests—conducted on 31 October 2025 and 6 November 2023—resulting in clean passes at 3,158 and 2,127 miles respectively. No defects or advisories were recorded during either inspection, indicating the vehicle has not faced repeated mechanical or structural issues requiring attention. The most recent test, just under nine months ago, aligns with the DVSA’s three-year MOT cycle for this model, meaning the vehicle has not yet reached its next mandatory check. This consistency suggests the owner has adhered to basic maintenance, though the exceptionally low mileage raises questions about usage patterns. The recorded mileage of 3,158 miles over approximately seven years—roughly 450 miles annually—is unusually low for a vehicle of this age. The gap between tests, spanning nearly two years (from 2,127 to 3,158 miles), further supports minimal usage. Such low mileage could imply the car has spent extended periods stationary, potentially accelerating wear on components like suspension bushes, coil springs, and brake fluid integrity due to lack of movement. Alternatively, it may reflect careful, infrequent use by a single owner. Either scenario warrants scrutiny of non-drive-related deterioration, such as tyre degradation from prolonged standing or corrosion in areas like wheel arches and underbody. Given the lack of recorded faults, the primary focus for an in-person inspection should centre on consumables and passive systems. Tyres, despite low mileage, may show uneven wear or dry-rotting if the vehicle has been stored without movement. Check for corrosion on wheel arches, subframes, and suspension mounts, as static conditions can accelerate rust. The CVT transmission should be assessed for fluid condition and leaks, as CVTs are sensitive to prolonged inactivity. Brakes, while not flagged in tests, should be inspected for binding calipers or glazed discs, as low-mileage vehicles can develop issues if brakes were not regularly used to clear moisture. Finally, verify that all fluid levels—brake, coolant, and CVT—remain within manufacturer specifications, as stagnation can degrade their effectiveness.