1998 Peugeot 106 1.1L Petrol · R49 DDT
1998 Peugeot 106 (1.1L, petrol). First registered 26 May 1998. Recorded mileage 65,865 miles. MOT expired on 29 Jul 2026.
- Make & Model
- PEUGEOT 106
- Year / Origin
- 1998 · Reading
- Safety Recall
- Unknown
- MOT Status
- Expired on 29 Jul 2026
- Road Tax
- —
- Recorded Mileage
- 65,865 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.1L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
R49 DDT Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 29/07/2025
- 65,865 miles recorded at latest MOT
- 1 historical MOT failure
- No defects recorded at the latest MOT
- Recurring exhaust & emissions items (2 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
R49 DDT MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1998 Peugeot 106 (R49 DDT) between July 2022 and July 2025.
The record contains 4 passes and 1 failure.
The most recent test on 29 July 2025 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Exhaust & Emissions (2 issues), Steering (1 issue), Suspension (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 1 advisory notice is recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Emissions not tested due to exhaust leak (8.2.1.2 (d))”; “Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))”; “Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))”.
R49 DDT Mileage History
- 22/07/202263,704 mi
- 22/07/202263,704 mi
- 24/07/202364,666 mi+962 mi
- 17/07/202465,095 mi+429 mi
- 29/07/202565,865 mi+770 mi
Average of roughly 715 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 106
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 106
Known issues reported by owners and MOT testers.
- Rear Trailing Arm Axle Bearing Seizure(Serious)
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant Leaks(Serious)
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant Wear(Moderate)
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (R49D Series)
Vehicles registered in the same regional DVLA batch as R49DDT.
PEUGEOT 106 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1998 model year cars.
- Rear Trailing Arm Axle Bearing SeizureSerious
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant LeaksSerious
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant WearModerate
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.