1998 Peugeot 106 1.1L Petrol · R967 BKP
1998 Peugeot 106 (1.1L, petrol). First registered 30 Apr 1998. Recorded mileage 66,708 miles. MOT expired on 05 Oct 2026. Taxed until 01 May 2027.
- Make & Model
- PEUGEOT 106
- Year / Origin
- 1998 · Reading
- Safety Recall
- Unknown
- MOT Status
- Expired on 05 Oct 2026
- Road Tax
- Taxed (01 May 2027)
- Recorded Mileage
- 66,708 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.1L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
R967 BKP Key Findings
- 5 MOT tests recorded
- Latest MOT failed on 30/09/2026
- 66,708 miles recorded at latest MOT
- 3 historical MOT failures
- 9 defects noted at the latest MOT
- Recurring lighting items (7 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
R967 BKP MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 1998 Peugeot 106 (R967 BKP) between September 2024 and September 2026.
The record contains 2 passes and 3 failures.
The most recent test on 30 September 2026 was a fail; the vehicle has not passed its last recorded MOT.
Across all tests, the most frequently flagged areas are: Lighting (7 issues), Exhaust & Emissions (6 issues), Brakes (3 issues), Steering (2 issues), Suspension (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 21 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))”; “Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural stren”; “Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))”.
R967 BKP Mileage History
- 19/09/202464,070 mi
- 27/09/202464,175 mi+105 mi
- 02/10/202566,335 mi+2,160 mi
- 02/10/202566,335 mi
- 30/09/202666,708 mi+373 mi
Average of roughly 1,301 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 106
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Poor
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 106
Known issues reported by owners and MOT testers.
- Rear Trailing Arm Axle Bearing Seizure(Serious)
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant Leaks(Serious)
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant Wear(Moderate)
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (R967 Series)
Vehicles registered in the same regional DVLA batch as R967BKP.
SUZUKI
RF900R
SUZUKI
GSF1200
VOLKSWAGEN
TRANSPORTER
MERCEDES-BENZ
CLK
DAIHATSU
FIELDMAN
HONDA
CBR600F
DUCATI
916
FORD
FIESTA
SUZUKI
GSX600
TOYOTA
REGIUS
VAUXHALL
VAUXHALL
CORSA
PEUGEOT 106 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1998 model year cars.
- Rear Trailing Arm Axle Bearing SeizureSerious
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant LeaksSerious
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant WearModerate
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.