2017 Jaguar XF 2.0L Diesel · RF17 XDH

The vehicle's MOT history indicates a stable but reactive maintenance pattern. The most recent recorded test on 25 June 2022 at 67,304 miles resulted in a pass, though the tester flagged pitted and scored rear brake discs. This follows a failure in February 2022 at 65,452 miles due to worn rear brake pads, a broken rear light cover, a non-functional position lamp, and the same issue with pitted rear brake discs. The recurrence of the brake disc advisory suggests the previous owner replaced the pads but neglected to install new discs, leaving the braking surfaces in a sub-optimal condition. The mileage accumulation appears consistent with the vehicle's age. Between February 2022 and June 2022, the car covered 1,852 miles, while the jump from February 2021 to February 2022 shows an increase of 6,053 miles. This averages out to roughly 7,500 miles per year, which aligns with the overall recorded mileage of 67,304. The data is somewhat sparse for the most recent four years leading up to the current date of 29 July 2026, so the absence of more recent MOT entries should be verified against the vehicle's actual current status. A prospective buyer should prioritise a physical inspection of the braking system. Because the rear discs were flagged as pitted and scored in both the February and June 2022 tests, they may be nearing the end of their service life or could cause vibration and reduced efficiency. Check the thickness and condition of the pads and ensure the calipers are not binding. The 2021 test also highlighted multiple tyres worn close to the legal limit, so the current tread depth and tyre age should be assessed to ensure they are not nearing replacement. Beyond the brakes and tyres, inspect all exterior lighting and glass. The history shows a pattern of minor electrical and bodywork failures, such as the broken rear light cover and damaged vision device in 2022. While these are consumable or accidental items, they suggest a need for a thorough check of all light clusters and mirror assemblies to ensure full compliance.