2017 Ford Ranger 3.2L Diesel · RJ67 ABK

The 2017 Ford Ranger’s most recent MOT test on January 9, 2026, confirms it remains roadworthy with no defects recorded at 71,216 miles. This reflects a stable maintenance pattern over the past three tests, as no advisories or failures have appeared since October 2023. The absence of recurring issues suggests the vehicle has been kept in basic compliance, though the lack of defects does not preclude hidden wear—especially in high-stress areas like suspension bushes, coil springs, and brake calipers. The test’s clean slate is reassuring, but the 2025 anomaly—where the vehicle was tested twice on the same date—implies either a clerical oversight or a brief period of neglect that did not escalate into mechanical failure. The mileage progression of approximately 7,900 miles annually aligns with typical usage for its age, though the gap between the 2022 and 2023 tests (a 5,581-mile increase over 11 months) suggests the vehicle was actively driven rather than stored. The most notable irregularity is the duplicate 2025 entry, which may indicate a rushed or improperly documented test cycle, but no failures were recorded during that period. The absence of larger mileage jumps or prolonged inactivity reduces concerns about severe dry-rotting of rubber components or excessive corrosion, though this cannot be confirmed without a physical inspection. Given the clean MOT history, a buyer should prioritise examining the suspension for worn or leaking bushes and coil springs, particularly at the rear where binding or uneven wear often develops. The brakes, though not flagged, warrant scrutiny for uneven disc thickness, glazed pads, or binding calipers—common in vehicles with this mileage. Corrosion should be checked at wheel arches, sills, and the subframe, as these areas are critical for structural integrity. The lack of advisories in recent tests does not rule out minor consumable wear, so tyres, wiper blades, and fluid levels should also be verified. The vehicle’s history suggests it has been maintained at a functional level, but a thorough mechanical inspection is essential to identify any deferred or hidden issues.