2007 Ford Focus 2.0L Petrol · RL07 ACL

The 2007 Ford Focus demonstrates stable roadworthiness based on its most recent MOT, conducted on 2025-07-15 at 90,251 miles, which resulted in a pass with no defects recorded. However, the vehicle’s MOT history reveals inconsistencies, including a 2024-07-15 test that simultaneously recorded both a pass and a failure at the same mileage (85,492 miles), which may indicate administrative error or duplicate entries. The 2023-07-12 tests also show a pass and failure at identical mileage (81,067 miles), suggesting similar anomalies. Despite these irregularities, the latest test confirms the vehicle met standards, though the pattern of repeated failures at matching mileage raises questions about the reliability of the data. The vehicle’s mileage of 90,251 miles over 19 years equates to approximately 4,750 miles annually, which is low for its age and implies infrequent use or prolonged periods of inactivity. This mileage trajectory reduces wear on consumables like tyres and brake pads but may accelerate corrosion in stationary components. Notably, the 2024-07-15 test occurred just 12 months after the 2023-07-12 test, with no significant mileage increase, which could indicate the vehicle was parked for extended periods. The absence of defects in the latest test suggests maintenance was addressed, but the sparse record lacks detail on repairs or recurring issues. A buyer should verify the vehicle’s structural integrity, as low mileage does not preclude rust or corrosion in critical areas like the chassis or body seams. Inspect the suspension system for worn bushes or coil springs, which may degrade over time even with minimal use. The brake system, including discs and calipers, should be checked for binding or uneven wear, as these can develop during inactivity. Additionally, confirm that the exhaust emissions and emissions control systems were properly addressed during any failed MOTs, as unresolved issues could resurface. The MOT record’s lack of specific defect details limits definitive conclusions, necessitating a physical inspection for hidden faults.