1998 Suzuki Grand Vitara 2.5L Petrol · S332 AFB

The 2.5-litre (H25A) and 2.7-litre (H27A) all-aluminium 24-valve V6 engines utilize a complex multi-chain timing system with hydraulic tensioners and plastic-lined guides. Infrequent oil changes or using incorrect oil viscosity causes carbon sludge to restrict oil supply ports to the hydraulic chain tensioners. This leads to collapsed tensioners, severe chain slap against the timing cover on cold starts, guide disintegration, and potential catastrophic valve-to-piston contact if the chain jumps timing teeth.

A well-documented weakness on the second-generation Grand Vitara is the tendency for front brake calipers to seize, particularly if the vehicle has been subjected to farm work, deep water splashes, or periods of inactivity. The rubber slider pin dust boots degrade, allowing road grit and corrosive salt to enter the sliding channels. The resulting brake pad drag overheats the ventilated front discs, resulting in disc warping, severe steering wheel vibration under braking, and MOT test failure for braking efficiency imbalance.

Despite its rugged ladder-frame chassis construction, the steel box sections on the Grand Vitara lack adequate factory internal wax protection. Mud, silt, and moisture accumulate inside the rear section of the chassis rails above the fuel tank and around the rear spring perches and body mounting brackets. Over British winters, severe rust develops from the inside out, causing structural metal thinning, chassis perforation, and immediate failure on the annual UK MOT test.