1998 Peugeot 106 1.6L Petrol · S404 GKP
1998 Peugeot 106 (1.6L, petrol). First registered 01 Aug 1998. Recorded mileage 122,617 miles. MOT expired on 29 Jun 2022.
- Make & Model
- PEUGEOT 106
- Year / Origin
- 1998 · Glasgow
- Safety Recall
- Unknown
- MOT Status
- Expired on 29 Jun 2022
- Road Tax
- Untaxed (12 Jan 2023)
- Recorded Mileage
- 122,617 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- PETROL · 1.6L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
S404 GKP Key Findings
- 19 MOT tests recorded
- Latest MOT passed on 30/06/2021
- 122,617 miles recorded at latest MOT
- 9 historical MOT failures
- 4 defects noted at the latest MOT
- Recurring brakes items (19 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
S404 GKP MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
19 MOT tests are recorded for this 1998 Peugeot 106 (S404 GKP) between August 2006 and June 2021.
The record contains 10 passes and 9 failures.
The most recent test on 30 June 2021 was a pass, although the earlier record includes 9 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (19 issues), Lighting (15 issues), Exhaust & Emissions (13 issues), Tyres (11 issues), Windscreen (9 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 42 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)”; “Nearside Front Suspension component mounting prescribed area is excessively corroded wishbone rear bush (2.4.A.3)”; “Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)”.
S404 GKP Mileage History
- 03/08/200661,021 mi
- 03/08/200661,021 mi
- 02/08/200763,890 mi+2,869 mi
- 09/09/200866,302 mi+2,412 mi
- 05/08/200968,644 mi+2,342 mi
- 05/08/200968,645 mi+1 mi
- 09/09/201070,914 mi+2,269 mi
- 06/09/201180,824 mi+9,910 mi
- 06/09/201180,824 mi
- 24/10/201298,915 mi+18,091 mi
- 26/10/201298,924 mi+9 mi
- 28/10/2013106,450 mi+7,526 mi
- 01/11/2013106,591 mi+141 mi
- 01/11/2013106,592 mi+1 mi
- 02/07/2015118,531 mi+11,939 mi
- 08/07/2015118,569 mi+38 mi
- 31/05/2017122,568 mi+3,999 mi
- 31/07/2017122,580 mi+12 mi
- 30/06/2021122,617 mi+37 mi
Average of roughly 4,132 miles per year across 19 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 106
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 106
Known issues reported by owners and MOT testers.
- Rear Trailing Arm Axle Bearing Seizure(Serious)
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant Leaks(Serious)
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant Wear(Moderate)
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (S404 Series)
Vehicles registered in the same regional DVLA batch as S404GKP.
LAND ROVER
DEFENDER
TOYOTA
STARLET
HONDA
CB600 HORNET
FORD
TOYOTA
MR2
PORSCHE
CARRERA GT
VOLKSWAGEN
PASSAT
BUELL
S1
MAZDA
MX-5
VOLKSWAGEN
TRANSPORTER
LAND ROVER
RANGE ROVER
AUDI
Q2
PEUGEOT 106 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1998 model year cars.
- Rear Trailing Arm Axle Bearing SeizureSerious
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant LeaksSerious
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant WearModerate
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.