2006 Ford Fusion 1.4L Petrol · S8 TWO
2006 Ford Fusion (1.4L, petrol). First registered 31 Oct 2006. Recorded mileage 120,782 miles. MOT valid until 11 Sept 2027.
- Make & Model
- FORD FUSION
- Year / Origin
- 2006 · Glasgow
- Safety Recall
- Unknown
- MOT Status
- Valid until 11 Sept 2027
- Road Tax
- —
- Recorded Mileage
- 120,782 mi
- ULEZ Compliance
- ULEZ Compliant (Euro 4+)
- Fuel & Engine
- Petrol · 1.4L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
S8 TWO Key Findings
- 5 MOT tests recorded
- Latest MOT passed on 14/08/2026
- 120,782 miles recorded at latest MOT
- 2 historical MOT failures
- 2 defects noted at the latest MOT
- Recurring lighting items (9 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
S8 TWO MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
5 MOT tests are recorded for this 2006 Ford Fusion (S8 TWO) between August 2024 and August 2026.
The record contains 3 passes and 2 failures.
The most recent test on 14 August 2026 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Lighting (9 issues), Suspension (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 8 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))”.
S8 TWO Mileage History
- 20/08/2024115,280 mi
- 15/08/2025118,059 mi+2,779 mi
- 15/08/2025118,059 mi
- 14/08/2026120,782 mi+2,723 mi
- 14/08/2026120,782 mi
Average of roughly 2,776 miles per year across 5 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Ford Ford Fusion (Europe)
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: FORD FUSION
Known issues reported by owners and MOT testers.
- Pollen Filter Housing Bulkhead Water Ingress(Moderate)
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer Leak(Moderate)
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator Fault(Serious)
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (S8TW Series)
Vehicles registered in the same regional DVLA batch as S8TWO.
SUBARU
FORESTER
BMW
3 SERIES
AUDI
Q3 S LINE 35 TFSI S-A
VOLVO
XC60 ULTRA B5 MHEV AWD AUTO
CITROEN
C3 FLAIR + PURETECH S/S AUTO
MAZDA
CX-5
JEEP
AVENGER ALTITUDE MHEV S-A
KIA
SPORTAGE GT-LINE MHEV S-A
VOLKSWAGEN
TIGUAN
VAUXHALL
AGILA
BMW
118
LAND ROVER
DISCOVERY SPORT R-DYN SE D A
FORD FUSION Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2006 model year cars.
- Pollen Filter Housing Bulkhead Water IngressModerate
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer LeakModerate
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator FaultSerious
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.