2013 Peugeot 107 1.0L Petrol · SA13 KUC
2013 Peugeot 107 (1.0L, petrol). First registered 30 Mar 2013. Recorded mileage 59,907 miles. MOT valid until 26 Jan 2027. A manufacturer safety recall is currently outstanding.
- Make & Model
- PEUGEOT 107
- Year / Origin
- 2013 · Glasgow
- Safety Recall
- Recall Notice
- MOT Status
- Valid until 26 Jan 2027
- Road Tax
- —
- Recorded Mileage
- 59,907 mi
- ULEZ Compliance
- ULEZ Compliant (Euro 4+)
- Fuel & Engine
- Petrol · 1.0L
- Reliability Guide
- Common Faults
Outstanding Safety Recall Notice
Action RequiredOfficial DVSA telemetry indicates this vehicle has an unaddressed manufacturer safety recall. Remedial repairs are legally required to be carried out 100% free of charge by an authorised main dealer.
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
SA13 KUC Key Findings
- 13 MOT tests recorded
- Outstanding manufacturer safety recall notice
- Latest MOT passed on 26/01/2026
- 59,907 miles recorded at latest MOT
- 2 historical MOT failures
- 2 defects noted at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
SA13 KUC MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
13 MOT tests are recorded for this 2013 Peugeot 107 (SA13 KUC) between April 2016 and January 2026.
The record contains 11 passes and 2 failures.
The most recent test on 26 January 2026 was a pass, although the earlier record includes 2 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (9 issues), Exhaust & Emissions (3 issues), Bodywork (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 16 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly re”; “Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly red”; “Hazard warning switch inoperative (4.4.2 (a) (ii))”.
SA13 KUC Mileage History
- 01/04/201613,664 mi
- 16/03/201718,357 mi+4,693 mi
- 29/03/201822,651 mi+4,294 mi
- 11/04/201924,053 mi+1,402 mi
- 11/04/201924,053 mi
- 27/01/202024,718 mi+665 mi
- 30/12/202028,928 mi+4,210 mi
- 15/01/202235,049 mi+6,121 mi
- 10/01/202342,694 mi+7,645 mi
- 02/01/202449,112 mi+6,418 mi
- 27/12/202454,299 mi+5,187 mi
- 08/01/202659,868 mi+5,569 mi
- 26/01/202659,907 mi+39 mi
Average of roughly 4,709 miles per year across 13 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 107
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 107
Known issues reported by owners and MOT testers.
- Premature Clutch Wear on Urban Cars(Moderate)
The 1.0-litre 107 is predominantly used for urban commuting and first-time driver learning, placing immense strain on the lightweight clutch assembly. Pre-2009 models were manufactured with an undersized 180mm clutch friction plate that frequently wore out before 40,000 miles. Symptoms include a biting point at the very top of pedal travel, slipping in higher gears under moderate acceleration, and severe judder when moving off from a standstill. Peugeot later superseded the part with a sturdier 190mm clutch kit.
- Water Pump Bearing Seepage and Coolant Loss(Moderate)
The coolant water pump on the 1.0-litre 1KR-FE three-cylinder petrol engine has a limited working lifespan and commonly develops shaft seal leaks or bearing failure. If left undetected, coolant gradually drains from the system, leading to engine overheating and potential cylinder head gasket failure. Early detection is possible by looking for dried crusty pink coolant residue around the water pump pulley on the auxiliary belt drive side of the engine block.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (SA13 Series)
Vehicles registered in the same regional DVLA batch as SA13KUC.
VOLVO
C30
MERCEDES-BENZ
S-Class
MINI
MINI COOPER SE CLASSIC E
VAUXHALL
CORSA
VAUXHALL
CORSA
BMW
I4 EDRIVE35 M SPORT
VAUXHALL
CORSA SXI AC
VAUXHALL
CORSA
VAUXHALL
CORSA
VAUXHALL
CORSA
VAUXHALL
CORSA
VAUXHALL
CORSA
PEUGEOT 107 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2013 model year cars.
- Premature Clutch Wear on Urban CarsModerate
The 1.0-litre 107 is predominantly used for urban commuting and first-time driver learning, placing immense strain on the lightweight clutch assembly. Pre-2009 models were manufactured with an undersized 180mm clutch friction plate that frequently wore out before 40,000 miles. Symptoms include a biting point at the very top of pedal travel, slipping in higher gears under moderate acceleration, and severe judder when moving off from a standstill. Peugeot later superseded the part with a sturdier 190mm clutch kit.
- Water Pump Bearing Seepage and Coolant LossModerate
The coolant water pump on the 1.0-litre 1KR-FE three-cylinder petrol engine has a limited working lifespan and commonly develops shaft seal leaks or bearing failure. If left undetected, coolant gradually drains from the system, leading to engine overheating and potential cylinder head gasket failure. Early detection is possible by looking for dried crusty pink coolant residue around the water pump pulley on the auxiliary belt drive side of the engine block.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.