2003 Ford Fusion 1.4L Petrol · SE03 NHY
2003 Ford Fusion (1.4L, petrol). First registered 17 Jul 2003. Recorded mileage 124,803 miles. MOT expired on 11 Jul 2024.
- Make & Model
- FORD FUSION
- Year / Origin
- 2003 · Glasgow
- Safety Recall
- Unknown
- MOT Status
- Expired on 11 Jul 2024
- Road Tax
- —
- Recorded Mileage
- 124,803 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.4L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
SE03 NHY Key Findings
- 3 MOT tests recorded
- Latest MOT passed on 15/06/2023
- 124,803 miles recorded at latest MOT
- 1 historical MOT failure
- 7 defects noted at the latest MOT
- Recurring brakes items (11 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
SE03 NHY MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
3 MOT tests are recorded for this 2003 Ford Fusion (SE03 NHY) between July 2022 and June 2023.
The record contains 2 passes and 1 failure.
The most recent test on 15 June 2023 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (11 issues), Suspension (9 issues), Lighting (7 issues), Tyres (6 issues), Exhaust & Emissions (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 31 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Rear Brakes imbalanced across an axle ( There is a 46% imbalance across the rear axle biased to the offside rear. ) (1.2”; “Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure ( Tyre also has a screw in the t”; “Headlamp aim not tested both front (4.1.2 (b))”.
SE03 NHY Mileage History
- 06/07/2022113,774 mi
- 13/07/2022113,924 mi+150 mi
- 15/06/2023124,803 mi+10,879 mi
Average of roughly 11,702 miles per year across 3 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Ford Ford Fusion (Europe)
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Poor
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: FORD FUSION
Known issues reported by owners and MOT testers.
- Pollen Filter Housing Bulkhead Water Ingress(Moderate)
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer Leak(Moderate)
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator Fault(Serious)
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (SE03 Series)
Vehicles registered in the same regional DVLA batch as SE03NHY.
VOLKSWAGEN
POLO
VOLKSWAGEN
BORA
RENAULT
MEGANE SCENIC
BMW
3 SERIES
BMW
X5
VAUXHALL
CORSA
RENAULT
SCENIC
LAND ROVER
DISCOVERY
VAUXHALL
CORSA
AUDI
A6 S LN BLK ED 40TDI MHEV Q SA
LAND ROVER
DISCOVERY SPORT R-DYNAMIC SE A
RENAULT
GRAND SCENIC
FORD FUSION Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2003 model year cars.
- Pollen Filter Housing Bulkhead Water IngressModerate
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer LeakModerate
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
- Durashift EST Automated Manual Transmission Actuator FaultSerious
The optional Durashift Electronic Shift Transmission (EST) utilizes an automated mechanical clutch and electro-mechanical gear selector actuators mounted to a standard manual gearbox. Over time, internal electric actuator motors suffer brush wear, moisture ingress, or solder joint failure on the integrated control module. When the transmission control unit loses position calibration or cannot actuate the clutch, the system enters fail-safe mode, flashing a transmission warning on the instrument cluster and preventing engine cranking.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.