2014 Fiat 500C 1.2L Petrol · SG14 XGY

The most recent MOT test on 2025-12-04 confirms this 2014 Fiat 500C remains roadworthy at 54,393 miles, with no defects or advisories recorded. The test history shows a stable pattern of compliance, though the repeated failures in July and December 2024—both at the same mileage (42,823 and 43,968)—suggest a brief but unresolved issue that was rectified before the subsequent passes. No structural or safety-critical failures have recurred since 2024, but the proximity of the last test to the current date (just seven months ago) means some components may now be approaching their next inspection window. The recorded mileage of 54,393 miles over 12 years equates to approximately 4,533 miles annually, which is unusually low for a vehicle of this age. The gap between the 2024-07-23 failure and the 2024-07-24 pass—just 24 hours and no mileage change—indicates the issue was likely mechanical rather than a simple oversight. The lack of intermediate tests or mileage jumps also implies the car has spent extended periods stationary, which could accelerate wear on suspension bushes, coil springs, and brake calipers due to lack of movement. This pattern suggests either light daily use or prolonged storage, both of which may have contributed to uneven degradation of non-consumable parts. Given the clean MOT record since 2024, the most critical areas for an in-person inspection should focus on components that often fail without obvious external signs. The repeated 2024 failures—despite no recorded defects—hint at potential binding rear brakes or worn suspension bushes, both of which can cause intermittent failures without visible corrosion or damage. Examine the rear brake calipers for lateral play or uneven wear on discs, and check all suspension bushes (upper/lower control arms, subframe mounts) for cracks or excessive compression. Corrosion in wheel arches or sills, particularly around the rear, should also be scrutinised, as this is a common failure point for vehicles of this age and mileage. Finally, verify the condition of the exhaust system for leaks or broken hangers, as these are often overlooked but can lead to emissions failures.