2022 Mercedes-Benz CLA 180 AMG LN Prm+ Night ED A 1.3L Petrol · SM72 THH

The vehicle’s most recent MOT test occurred just seven months ago on 1 October 2025, yet the record shows an unusual dual entry—both a pass and a fail at the same mileage of 42,104. This anomaly suggests either a clerical error in the DVSA system or a rare case of a vehicle being tested twice on the same day, likely due to a procedural oversight rather than a genuine mechanical issue. No defects were recorded in either entry, which implies the tester did not identify any major failings at that point. However, the lack of a clear pass date within the past year means the vehicle has not undergone a formal roadworthiness inspection since October 2025. This gap is concerning, as it leaves critical components—such as suspension integrity, brake hydraulic systems, and exhaust emissions—unverified for nearly a year, a period during which wear on high-mileage AMG-tuned models can accelerate. The recorded mileage of 42,104 miles over approximately four years equates to an average of around 10,500 miles annually, which aligns with typical usage patterns for this class of vehicle. There are no visible gaps in service intervals or abrupt spikes in mileage that would suggest prolonged neglect or aggressive driving. However, the absence of any pre-MOT service records or maintenance logs means there is no confirmation that critical components like suspension bushes, coil springs, or brake calipers have been inspected or replaced within the expected intervals. The lack of a service history also makes it impossible to confirm whether the vehicle has undergone the manufacturer-recommended checks for an AMG-tuned engine, which often require more frequent attention to cooling systems and drivetrain components. Given the absence of recorded defects in the most recent tests, the primary focus for an in-person inspection should centre on components that are prone to accelerated wear in high-performance models. The suspension—particularly the rear coil springs and bushes—should be examined for uneven wear, excessive play, or corrosion, as these are common failure points in AMG-tuned vehicles. Brake discs and calipers, especially the rear, should be checked for uneven wear, binding, or excessive heat discolouration, as the MOT tester did not flag any brake-related issues, but this does not guarantee their current condition. Additionally, the exhaust system should be inspected for leaks, corrosion, or improper mounting, as catalytic converters and oxygen sensors in AMG models are prone to failure if not maintained. Structural integrity, including the subframe and body panels, should also be scrutinised for signs of rust or impact damage, particularly around wheel arches and underbody components, where corrosion can compromise safety-critical elements.