2023 Ford Ranger Wildtrak Ecoblue 4X4 A 3.0L Diesel · SO71 PSY

The most recent MOT test conducted on 5 February 2026 resulted in a pass with no defects recorded. This follows a clean pass in February 2025, establishing a stable and consistent maintenance trend. The absence of any recorded advisories or failures across the vehicle's MOT history suggests that the primary safety components, including lighting, braking systems, and structural integrity, have been maintained to a high standard and meet all current DVSA regulatory requirements. With a recorded mileage of 30,469 miles over approximately four years, the vehicle has covered an average of roughly 7,617 miles per annum. This represents a typical usage pattern for a modern electric vehicle, indicating that the car is used regularly enough to prevent excessive component stagnation but not so heavily as to cause premature wear on the suspension, steering, or drivetrain. This moderate mileage profile is generally favourable for a prospective buyer, as it suggests the vehicle has not been subjected to the heavy mechanical strain associated with high-mileage commercial or long-distance commuter use. As the MOT history is entirely clear of defects, your inspection should focus on age-related degradation and time-based maintenance rather than wear-induced failures. Examine the tyres thoroughly for any signs of perishing, sidewall cracking, or uneven wear, which can occur due to the age of the rubber or minor tracking issues. It is also advisable to inspect the brake discs for surface corrosion or pitting, particularly if the vehicle has been stationary for periods, and check for any signs of binding calipers. Given the electric nature of the vehicle, ensure the 12V auxiliary battery is in good health, as these can lose capacity if the vehicle is not driven frequently. Finally, verify the service book to confirm that all manufacturer-recommended time-based intervals have been met, specifically regarding brake fluid replacement and coolant system checks. During your test drive, pay close attention to the smoothness of the braking action to ensure there is no shuddering or pulsation, and listen for any knocks or clunks from the suspension bushes or coil springs when navigating uneven surfaces. This holistic approach will help confirm that the vehicle's mechanical condition aligns with its clean regulatory record.