2024 BMW 116 1.5L Diesel · SP02 AMP

The most recent MOT test conducted on 16 January 2026 resulted in a clean pass with no defects or advisories recorded. Given the relatively young age of the vehicle, the maintenance trend appears stable, although the testing history is naturally limited. The absence of any recorded failures or advisories suggests that the vehicle was in a satisfactory condition at the time of testing, with no immediate structural or mechanical issues identified by the inspector. The recorded mileage of 8,543 miles indicates an annual usage rate of approximately 4,272 miles, which is exceptionally low for a two-year-old vehicle. While this low mileage suggests minimal wear on the engine, gearbox, and suspension components, it also indicates that the vehicle has likely been used for short journeys or has spent significant periods stationary. This pattern of infrequent use can sometimes mask underlying issues that do not manifest through mileage but rather through time and inactivity. Because the MOT record is clean and the mileage is low, your physical inspection should focus on the effects of long periods of standing. Closely examine the tyres for any signs of perishing or sidewall cracking, as rubber can degrade due to age regardless of tread depth. Check the brake discs for heavy corrosion or pitting and ensure the calipers are not binding, which can happen if the vehicle has not been driven regularly enough to clear surface oxidation. It is also vital to verify that the service history follows manufacturer-recommended time intervals rather than just mileage intervals, as oil and other fluids can degrade over time even if the car has barely moved. Additionally, you should assess the condition of the 12V battery, as low-use vehicles are susceptible to discharge and loss of charge capacity. During the test drive, listen for any unusual clunks or stiffness from the suspension bushes or dampers, which can occur when components are not regularly cycled through their full range of motion. Check all fluid levels, specifically the coolant and brake fluid, to ensure they are within the correct levels and show no signs of contamination. Confirming a consistent service record with time-based stamps will be the best indicator of the vehicle's true mechanical health.