2015 Iveco Unknown 3.0L Diesel · SP15 CLJ

A long-term record of roadworthiness is evident across eight recorded tests, although the 2023 inspection highlighted specific deterioration in the braking system and rear suspension. Since those findings, the record has stabilised, with the most recent test on 20 May 2025 returning a clean pass with no defects. The overall trend indicates a vehicle that has consistently met minimum safety standards, despite a period of noted component wear three years ago. Accumulating 146,733 miles over approximately eleven years results in an average annual usage of roughly 13,339 miles. This is a high rate of accumulation for its age, which typically correlates with accelerated wear on drivetrain components, suspension bushings, and braking consumables. The consistency of the annual testing intervals indicates the vehicle has remained in active service without significant gaps in usage. Attention should be directed toward the braking system, specifically regarding the issues flagged in 2023. While subsequent tests were clean, the previous reports of a twisted nearside front brake hose, a chafed nearside rear hose, and a binding nearside front service brake warrant a thorough physical inspection of the rubber lines for any signs of perishing or renewed chafing. During a test drive, the buyer should feel for any uneven braking or a pull to one side, and check for excessive heat emanating from the nearside front wheel after a period of driving, which would indicate a recurring binding caliper. The rear leaf spring shackle pins and bushes on both the nearside and offside were previously noted for wear. This type of deterioration often manifests as knocks or rattles when traversing uneven road surfaces or when the vehicle is under load. A physical inspection of the rear leaf spring mounts is necessary to ensure the shackle pins are secure and the bushes are not perished. Given the high mileage, the integrity of all suspension linkages and the condition of the chassis should be verified to ensure no further wear has developed since the last inspection.