1999 Daimler Super V8 4.0L Petrol · T40 DSE
1999 Daimler Super V8 (4.0L, petrol). First registered 17 Mar 1999. Recorded mileage 82,382 miles. MOT expired on 13 Apr 2026.
- Make & Model
- DAIMLER SUPER V8
- Year / Origin
- 1999
- Safety Recall
- Unknown
- MOT Status
- Expired on 13 Apr 2026
- Road Tax
- —
- Recorded Mileage
- 82,382 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 4.0L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
T40 DSE Key Findings
- 4 MOT tests recorded
- Latest MOT passed on 14/04/2025
- 82,382 miles recorded at latest MOT
- No defects recorded at the latest MOT
Derived directly from the recorded DVSA and DVLA data shown on this page.
T40 DSE MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
4 MOT tests are recorded for this 1999 Daimler Super V8 (T40 DSE) between February 2022 and April 2025.
The record contains 4 passes and 0 failures.
No failures or advisories appear anywhere in the recorded tests, so the documented MOT record is relatively clean.
T40 DSE Mileage History
- 17/02/202277,969 mi
- 15/02/202379,511 mi+1,542 mi
- 28/02/202482,157 mi+2,646 mi
- 14/04/202582,382 mi+225 mi
Average of roughly 1,399 miles per year across 4 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Daimler Daimler Super V8
Our database tracks 4 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: DAIMLER SUPER V8
Known issues reported by owners and MOT testers.
- Plastic Secondary Timing Chain Tensioner Fracture and Camshaft Mis-timing(Serious)
Early 4.0-litre AJ-V8 engines (AJ26S and AJ27S) in the X308 Daimler Super V8 were fitted from the factory with plastic-bodied secondary camshaft timing chain tensioners. Over time, engine oil heat cycles and mechanical fatigue embrittle the nylon plastic bodies and slipper shoes. The plastic body cracks or breaks away completely, allowing the timing chain to slacken and jump sprocket teeth on startup. In the worst cases, the camshaft skips multiple teeth, causing the valves to strike the pistons and destroying the cylinder head. Upgrading to robust metal-bodied third-generation tensioners with shorter bolts is an essential preventative modification.
- Nikasil Cylinder Liner Chemical Erosion and Cold-Start Compression Loss(Serious)
Prior to late 2000, 4.0-litre AJ-V8 blocks used a nickel-silicon carbide (Nikasil) electro-plated bore coating in place of traditional cast-iron cylinder liners. High sulphur concentrations in 1990s UK petrol reacted with combustion moisture to form acidic compounds that chemically eroded the Nikasil coating. Pitted cylinder walls caused piston ring blow-by and loss of cylinder compression, resulting in difficult cold starting or total refusal to fire after short start-and-stop moves ('bore wash'). While modern low-sulphur fuels halted active erosion, surviving original Nikasil engines must be checked for stable compression and blow-by before purchase.
- Rear Lower Wishbone and Hub Carrier Bush Wear Causing Wandering and MOT Failure(Moderate)
Both the X308 and X350 generations of the Daimler Super V8 utilise an independent rear suspension layout featuring multi-link arms, aluminium wishbones, and rubber-metal bushes. The immense torque (up to 400 lb-ft) of the supercharged powertrain combined with UK potholes and speed bumps places enormous stress on the lower wishbone bushes and hub carrier ball joints. The rubber perishes and develops excessive play, allowing the rear wheels to steer passively under acceleration and braking. In addition to creating an unsettling floaty sensation on motorways, worn bushes result in MOT failure and rapid inner tyre shoulder scrubbing.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (T40D Series)
Vehicles registered in the same regional DVLA batch as T40DSE.
VAUXHALL
FRONTERA GS EV
LAND ROVER
RANGE ROVER SPORT
VOLVO
V60 CROSS COUNTRY + T5 AWD A
DAF TRUCKS
XF
VOLKSWAGEN
TRANSPORTER T28 HIGHLINE TDI
SKODA
CITIGO
VOLKSWAGEN
POLO
TOYOTA
AYGO X EXCLUSIVE VVT-I
TOYOTA
C-HR
DACIA
TIGGO 4 SUMMIT HEV AUTO
MERCEDES-BENZ
ML
JAGUAR
E-PACE
DAIMLER SUPER V8 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1999 model year cars.
- Plastic Secondary Timing Chain Tensioner Fracture and Camshaft Mis-timingSerious
Early 4.0-litre AJ-V8 engines (AJ26S and AJ27S) in the X308 Daimler Super V8 were fitted from the factory with plastic-bodied secondary camshaft timing chain tensioners. Over time, engine oil heat cycles and mechanical fatigue embrittle the nylon plastic bodies and slipper shoes. The plastic body cracks or breaks away completely, allowing the timing chain to slacken and jump sprocket teeth on startup. In the worst cases, the camshaft skips multiple teeth, causing the valves to strike the pistons and destroying the cylinder head. Upgrading to robust metal-bodied third-generation tensioners with shorter bolts is an essential preventative modification.
- Nikasil Cylinder Liner Chemical Erosion and Cold-Start Compression LossSerious
Prior to late 2000, 4.0-litre AJ-V8 blocks used a nickel-silicon carbide (Nikasil) electro-plated bore coating in place of traditional cast-iron cylinder liners. High sulphur concentrations in 1990s UK petrol reacted with combustion moisture to form acidic compounds that chemically eroded the Nikasil coating. Pitted cylinder walls caused piston ring blow-by and loss of cylinder compression, resulting in difficult cold starting or total refusal to fire after short start-and-stop moves ('bore wash'). While modern low-sulphur fuels halted active erosion, surviving original Nikasil engines must be checked for stable compression and blow-by before purchase.
- Rear Lower Wishbone and Hub Carrier Bush Wear Causing Wandering and MOT FailureModerate
Both the X308 and X350 generations of the Daimler Super V8 utilise an independent rear suspension layout featuring multi-link arms, aluminium wishbones, and rubber-metal bushes. The immense torque (up to 400 lb-ft) of the supercharged powertrain combined with UK potholes and speed bumps places enormous stress on the lower wishbone bushes and hub carrier ball joints. The rubber perishes and develops excessive play, allowing the rear wheels to steer passively under acceleration and braking. In addition to creating an unsettling floaty sensation on motorways, worn bushes result in MOT failure and rapid inner tyre shoulder scrubbing.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.