1991 Yamaha NOT Stated 0.9L Other · UXI 3942

This Yamaha’s most recent MOT test on 23 September 2024 confirmed full roadworthiness with no defects recorded, a clean pass that aligns with the preceding test in October 2021. The absence of advisories or failings across both tests suggests the vehicle has not experienced recurring mechanical issues that would warrant immediate concern. However, the 2021 test occurred nearly three years ago, placing it well beyond the standard 12-month MOT validity period. Given the vehicle’s age and the extended gap since the last inspection, a thorough professional check is essential before purchase, particularly for components prone to degradation over time. The recorded mileage of 41,262 miles over approximately 35 years equates to an average of around 1,179 miles annually, which is unusually low for a vehicle of this vintage. Such low mileage could indicate prolonged periods of storage or limited use, which may have mitigated some wear on high-mileage components like suspension bushes or drivetrain parts. However, it also raises questions about the vehicle’s storage conditions, as prolonged inactivity can accelerate deterioration in rubber seals, battery health, and fuel system integrity. The sparse MOT history—with no intermediate tests—means there is no data to confirm whether critical components like brakes, tyres, or exhaust systems were maintained during this period. Given the lack of recent MOT data and the vehicle’s age, a buyer should prioritise an inspection of the suspension system, particularly the condition of coil springs, bushes, and shock absorbers, as these are common failure points in older motorcycles. The brakes, including calipers, pads, and discs, should be examined for uneven wear or corrosion, especially if the vehicle has been stored for extended periods, as moisture can accelerate rust formation. Tyres, despite their low mileage, warrant scrutiny for uneven tread wear or internal damage, as prolonged inactivity can lead to sidewall cracking. Structural integrity, including the frame and fuel tank, should also be assessed for signs of corrosion or stress cracks, which are often exacerbated by age and environmental exposure.