2000 Peugeot 406 1.8L Petrol · V169 KAN
2000 Peugeot 406 (1.8L, petrol). First registered 01 Jan 2000. Recorded mileage 217,568 miles. MOT expired on 27 May 2012.
- Make & Model
- PEUGEOT 406
- Year / Origin
- 2000 · Worcester
- Safety Recall
- Unknown
- MOT Status
- Expired on 27 May 2012
- Road Tax
- Untaxed (01 Jul 2012)
- Recorded Mileage
- 217,568 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- PETROL · 1.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
V169 KAN Key Findings
- 11 MOT tests recorded
- Latest MOT passed on 27/05/2011
- 217,568 miles recorded at latest MOT
- 5 historical MOT failures
- No defects recorded at the latest MOT
- Recurring brakes items (8 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
V169 KAN MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
11 MOT tests are recorded for this 2000 Peugeot 406 (V169 KAN) between April 2006 and May 2011.
The record contains 6 passes and 5 failures.
The most recent test on 27 May 2011 was a pass, although the earlier record includes 5 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (8 issues), Windscreen (3 issues), Lighting (3 issues), Steering (2 issues), Exhaust & Emissions (2 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 4 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Parking brake: efficiency below requirements (3.7.B.7)”; “Nearside rear parking brake recording little or no effort (3.7.B.6a)”; “Centre Exhaust system not adequately supported (7.1.1)”.
V169 KAN Mileage History
- 11/04/2006146,876 mi
- 11/04/2006146,876 mi
- 11/04/2007161,264 mi+14,388 mi
- 12/04/2007161,268 mi+4 mi
- 11/03/2008173,645 mi+12,377 mi
- 19/05/2009201,000 mi+27,355 mi
- 20/05/2009201,770 mi+770 mi
- 27/05/2010209,594 mi+7,824 mi
- 28/05/2010209,606 mi+12 mi
- 26/05/2011217,561 mi+7,955 mi
- 27/05/2011217,568 mi+7 mi
Average of roughly 13,792 miles per year across 11 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 406
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 406
Known issues reported by owners and MOT testers.
- HDi Dual Mass Flywheel and Clutch Wear(Serious)
The 2.0 HDi 110 and 2.2 HDi models utilize a dual mass flywheel (DMF) to dampen diesel crankshaft torsional vibrations. Over higher mileages, the internal springs and friction damper mechanisms within the flywheel fatigue and break down. This results in heavy driveline shudder, metallic chattering at idle, clutch slip in higher gears under torque, and in severe cases, catastrophic flywheel separation that punches through the gearbox bellhousing.
- Rear Multi-Link Suspension Passive Steer Bush Wear(Moderate)
The 406 features an advanced multi-link rear suspension design with trailing arms, transverse links, and passive rear-steering tie rods. After years on potholed UK roads, the rubber bonded bushes on the rear transverse track control arms and passive steer links perish and develop significant play. This causes vague rear-end handling, wandering or twitchiness on motorways, severe scrubbing of the rear tyres, and recurring MOT failures.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
PEUGEOT 406 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2000 model year cars.
- HDi Dual Mass Flywheel and Clutch WearSerious
The 2.0 HDi 110 and 2.2 HDi models utilize a dual mass flywheel (DMF) to dampen diesel crankshaft torsional vibrations. Over higher mileages, the internal springs and friction damper mechanisms within the flywheel fatigue and break down. This results in heavy driveline shudder, metallic chattering at idle, clutch slip in higher gears under torque, and in severe cases, catastrophic flywheel separation that punches through the gearbox bellhousing.
- Rear Multi-Link Suspension Passive Steer Bush WearModerate
The 406 features an advanced multi-link rear suspension design with trailing arms, transverse links, and passive rear-steering tie rods. After years on potholed UK roads, the rubber bonded bushes on the rear transverse track control arms and passive steer links perish and develop significant play. This causes vague rear-end handling, wandering or twitchiness on motorways, severe scrubbing of the rear tyres, and recurring MOT failures.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.