2000 Daewoo Matiz 0.8L Petrol · W218 JVV
2000 Daewoo Matiz (0.8L, petrol). First registered 01 Mar 2000. Recorded mileage 36,516 miles. MOT expired on 21 Sept 2013.
- Make & Model
- DAEWOO MATIZ
- Year / Origin
- 2000 · Exeter
- Safety Recall
- Unknown
- MOT Status
- Expired on 21 Sept 2013
- Road Tax
- Untaxed (01 Jul 2012)
- Recorded Mileage
- 36,516 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- PETROL · 0.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
W218 JVV Key Findings
- 10 MOT tests recorded
- Latest MOT passed on 22/09/2012
- 36,516 miles recorded at latest MOT
- 3 historical MOT failures
- 1 defect noted at the latest MOT
- Recurring brakes items (4 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
W218 JVV MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
10 MOT tests are recorded for this 2000 Daewoo Matiz (W218 JVV) between March 2006 and September 2012.
The record contains 7 passes and 3 failures.
The most recent test on 22 September 2012 was a pass, although the earlier record includes 3 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (4 issues), Tyres (3 issues), Lighting (1 issue), Windscreen (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 4 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Brakes imbalanced across an axle (3.7.B.5b)”; “Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)”; “Offside Front Front constant velocity joint gaiter split (2.5.C.1a)”.
W218 JVV Mileage History
- 07/03/200621,417 mi
- 15/03/200723,275 mi+1,858 mi
- 10/03/200825,086 mi+1,811 mi
- 19/02/200926,168 mi+1,082 mi
- 20/02/200926,184 mi+16 mi
- 23/03/201027,949 mi+1,765 mi
- 29/03/201027,979 mi+30 mi
- 25/03/201132,999 mi+5,020 mi
- 26/03/201132,999 mi
- 22/09/201236,516 mi+3,517 mi
Average of roughly 2,307 miles per year across 10 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Daewoo Daewoo Matiz
Our database tracks 5 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (W218 Series)
Vehicles registered in the same regional DVLA batch as W218JVV.
YAMAHA
FZS600
FORD
NISSAN
MICRA
RENAULT
CLIO
ISUZU
TROOPER TURBO DIESEL
MAZDA
BONGO
SKODA
FELICIA
PIAGGIO
VESPA
SUBARU
LEGACY
YAMAHA
VAUXHALL
CORSA
APRILIA
DAEWOO MATIZ Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2000 model year cars.
- Subframe and Suspension Mounting Point CorrosionSerious
Thin-gauge pressed steel and minimal factory underbody seam sealant leave the front subframe, rear axle mounting perches, and inner door sills vulnerable to accelerated corrosion from UK winter road salt. Moisture penetrates unsealed chassis joints, progressively weakening load-bearing suspension anchor points. If neglected, corrosion leads to dangerous structural failure where suspension components detach from the chassis, resulting in immediate MOT test failure. Rectifying advanced corrosion requires skilled metal fabrication and structural welding repairs.
- Brake Caliper Seizure and Hydraulic ImbalanceModerate
The compact single-piston front brake calipers and rear drum wheel cylinders suffer from corroded slide pins and sticking hydraulic pistons, exacerbated by road grime and infrequent fluid renewals on low-mileage city runabouts. As the caliper pistons seize in their bores, the front brake pads drag continuously or fail to exert equal clamping force, causing dangerous vehicle pulling during braking, overheated friction surfaces, reduced brake efficiency, and MOT roller brake tester failures.
- Ignition Distributor and Warm Starting FailureModerate
On 0.8-litre three-cylinder models, the optical ignition distributor contains an internal optical sensor and high-tension rotor that degrade under engine compartment heat cycling. Moisture ingress and carbon tracking within the distributor cap lead to misfiring under acceleration. When the car is parked warm for fifteen to thirty minutes, thermal heat soak prevents the internal optical sensor and coil from generating spark voltage, causing protracted cranking and refusal to restart until the engine bay cools down.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.