2000 Peugeot 306 1.4L Petrol · W229 VKE
2000 Peugeot 306 (1.4L, petrol). First registered 01 Mar 2000. Recorded mileage 67,469 miles. MOT expired on 29 Sept 2018.
- Make & Model
- PEUGEOT 306
- Year / Origin
- 2000 · Exeter
- Safety Recall
- Unknown
- MOT Status
- Expired on 29 Sept 2018
- Road Tax
- Untaxed (01 Apr 2018)
- Recorded Mileage
- 67,469 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- PETROL · 1.4L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
W229 VKE Key Findings
- 11 MOT tests recorded
- Latest MOT passed on 21/09/2017
- 67,469 miles recorded at latest MOT
- 4 historical MOT failures
- No defects recorded at the latest MOT
- Recurring brakes items (7 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
W229 VKE MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
11 MOT tests are recorded for this 2000 Peugeot 306 (W229 VKE) between December 2009 and September 2017.
The record contains 7 passes and 4 failures.
The most recent test on 21 September 2017 was a pass, although the earlier record includes 4 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (7 issues), Tyres (5 issues), Exhaust & Emissions (4 issues), Lighting (2 issues), Suspension (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 11 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)”; “Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)”; “Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)”.
W229 VKE Mileage History
- 31/12/200948,927 mi
- 26/03/201049,000 mi+73 mi
- 26/04/201150,795 mi+1,795 mi
- 30/05/201255,051 mi+4,256 mi
- 11/06/201358,756 mi+3,705 mi
- 01/09/201560,343 mi+1,587 mi
- 11/09/201560,422 mi+79 mi
- 29/09/201660,576 mi+154 mi
- 30/09/201660,576 mi
- 21/09/201767,469 mi+6,893 mi
Average of roughly 2,401 miles per year across 10 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 306
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 306
Known issues reported by owners and MOT testers.
- Rear Torsion Beam Radius Arm Bearing Failure(Serious)
Like other classic Peugeots of this era, the 306 rear suspension relies on a transverse torsion beam with trailing arms riding on internal needle roller bearings. Over UK winters, moisture and road salt breach the outer rubber seals, causing the ungreased needle bearings to disintegrate and machine grooves into the axle tube journals. As the bearings collapse, the rear wheels tilt sharply inward at the top (heavy negative camber). Left unaddressed, the inner tyre sidewall cuts into the metal wheel tub.
- Heater Matrix Coolant Leak into Footwell(Moderate)
The heater matrix core tucked behind the centre dashboard console is prone to corrosion and plastic tank seam failure. As the core leaks, hot engine coolant drips directly onto the front passenger carpet and air ducting. In addition to losing engine coolant, the escaping ethylene glycol causes an oily, greasy film on the windscreen that cannot be cleared by wipers or demister fans. Replacing the matrix requires comprehensive dashboard removal, making labour costs high.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
PEUGEOT 306 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2000 model year cars.
- Rear Torsion Beam Radius Arm Bearing FailureSerious
Like other classic Peugeots of this era, the 306 rear suspension relies on a transverse torsion beam with trailing arms riding on internal needle roller bearings. Over UK winters, moisture and road salt breach the outer rubber seals, causing the ungreased needle bearings to disintegrate and machine grooves into the axle tube journals. As the bearings collapse, the rear wheels tilt sharply inward at the top (heavy negative camber). Left unaddressed, the inner tyre sidewall cuts into the metal wheel tub.
- Heater Matrix Coolant Leak into FootwellModerate
The heater matrix core tucked behind the centre dashboard console is prone to corrosion and plastic tank seam failure. As the core leaks, hot engine coolant drips directly onto the front passenger carpet and air ducting. In addition to losing engine coolant, the escaping ethylene glycol causes an oily, greasy film on the windscreen that cannot be cleared by wipers or demister fans. Replacing the matrix requires comprehensive dashboard removal, making labour costs high.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.