2000 MG MGF 1.8L Petrol · W715 YBD
2000 MG MGF (1.8L, petrol). First registered 01 Mar 2000. Recorded mileage 68,725 miles. MOT expired on 14 Sept 2018.
- Make & Model
- MG MGF
- Year / Origin
- 2000 · Exeter
- Safety Recall
- Unknown
- MOT Status
- Expired on 14 Sept 2018
- Road Tax
- Untaxed (30 Jun 2018)
- Recorded Mileage
- 68,725 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- PETROL · 1.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
W715 YBD Key Findings
- 20 MOT tests recorded
- Latest MOT passed on 15/09/2017
- 68,725 miles recorded at latest MOT
- 8 historical MOT failures
- 1 defect noted at the latest MOT
- Recurring brakes items (18 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
W715 YBD MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
20 MOT tests are recorded for this 2000 Mg Mgf (W715 YBD) between March 2006 and September 2017.
The record contains 12 passes and 8 failures.
The most recent test on 15 September 2017 was a pass, although the earlier record includes 8 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (18 issues), Suspension (11 issues), Tyres (6 issues), Lighting (6 issues), Steering (3 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 26 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Nearside Front Shock absorber has a serious fluid leak (2.7.3)”; “Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)”; “Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)”.
W715 YBD Mileage History
- 15/03/200622,712 mi
- 22/03/200724,175 mi+1,463 mi
- 23/03/200724,175 mi
- 21/04/200826,787 mi+2,612 mi
- 24/04/200826,790 mi+3 mi
- 18/05/200933,585 mi+6,795 mi
- 21/05/200933,585 mi
- 18/05/201039,125 mi+5,540 mi
- 20/05/201039,180 mi+55 mi
- 28/05/201144,150 mi+4,970 mi
- 30/06/201246,412 mi+2,262 mi
- 31/07/201349,715 mi+3,303 mi
- 01/08/201349,716 mi+1 mi
- 19/09/201452,315 mi+2,599 mi
- 08/01/201552,324 mi+9 mi
- 17/08/201552,816 mi+492 mi
- 17/08/201552,816 mi
- 14/09/201661,047 mi+8,231 mi
- 14/09/201768,723 mi+7,676 mi
- 15/09/201768,725 mi+2 mi
Average of roughly 4,000 miles per year across 20 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for MG MGF
Our database tracks 6 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: MG MGF
Known issues reported by owners and MOT testers.
- Hydragas Suspension Leaks/Depressurisation(Moderate)
The MGF uses an interconnected Moulton Hydragas suspension system where fluid and pressurised nitrogen spheres replace conventional steel springs and dampers. Over time, the nitrogen gas chamber gradually permeates through the internal rubber diaphragm and fluid lines can develop leaks. This causes the car to sag, drop its ride height, lean unevenly, and lose damping compliance, producing a harsh, jarring ride that bottoms out over bumps. Dunlop ceased sphere production long ago, so UK owners rely on specialist mobile re-gassing services, refurbished displacer units, or aftermarket coil-spring conversion kits.
- Head Gasket Failure(Serious)
The Rover K-Series 16-valve petrol engine is notorious for head gasket failure, compounded in the MGF by its mid-engine layout, small 4.5-litre coolant volume, and long coolant pipe runs. Early engines used plastic dowels that allowed cylinder head shift, while any minor coolant weep quickly causes local overheating, annealing the aluminium head casting and breaching the elastomer gasket seals. Rectification requires skimming the head, upgrading to steel locating dowels, fitting an uprated multi-layer steel (MLS) gasket with an uprated lower oil rail, and bleeding cooling air locks meticulously.
- Underfloor Coolant Pipe Corrosion(Serious)
The MGF's mid-mounted engine requires twin metal coolant pipes running under the floorpan to connect the engine bay to the front-mounted radiator. Original factory pipes were fabricated from mild steel and routed directly through the underbody slipstream where they endure constant bombardment from UK road spray, grit, and winter road salt. These pipes rot internally and externally, developing hairline pinholes or sudden seam ruptures that dump engine coolant on the road. Because coolant capacity is low, sudden loss causes instant overheating and head gasket failure before the driver notices.
- Subframe and Sill Structural Corrosion(Serious)
While the exterior body panels of the MGF hold up decently, its structural underpinnings suffer severely from UK road salt and damp climate exposure. The front and particularly the rear box-section subframes act as moisture traps, rotting from the inside out around mounting blocks, wishbone brackets, and rear suspension turrets. In addition, water draining from the soft top into the hollow sills often blocks factory drain slits, causing structural rust in the inner and outer sills and floorpans around jacking points. Severe corrosion leads to MOT failure and requires expensive fabrication or subframe swaps.
- EPAS Steering Column Sensor Drift (Self-Steering)(Moderate)
MGF models equipped with Electronic Power Assisted Steering (EPAS) commonly develop an issue where the steering wheel actively pulls to one side (typically left) or even turns spontaneously when stationary. The EPAS system relies on a column-mounted optical or resistive torque sensor to gauge driver input. As the sensor ages or suffers mechanical drift from vibration, its calibrated neutral zero-point slips. The EPAS ECU misinterprets this as continuous driver steering effort and commands the electric motor to apply assistance. Rather than replacing the whole column, specialists can physically realign the sensor.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (W715 Series)
Vehicles registered in the same regional DVLA batch as W715YBD.
TRIUMPH
THUNDERBIRD
MG
MGF
HONDA
CBF
PORSCHE
911
MAZDA
E SERIES
VOLKSWAGEN
POLO
RENAULT
MEGANE
AUDI
CABRIOLET
MERCEDES-BENZ
SLK
VESPA (DOUGLAS)
P200E
VOLVO
V70
VOLKSWAGEN
TRANSPORTER
MG MGF Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2000 model year cars.
- Hydragas Suspension Leaks/DepressurisationModerate
The MGF uses an interconnected Moulton Hydragas suspension system where fluid and pressurised nitrogen spheres replace conventional steel springs and dampers. Over time, the nitrogen gas chamber gradually permeates through the internal rubber diaphragm and fluid lines can develop leaks. This causes the car to sag, drop its ride height, lean unevenly, and lose damping compliance, producing a harsh, jarring ride that bottoms out over bumps. Dunlop ceased sphere production long ago, so UK owners rely on specialist mobile re-gassing services, refurbished displacer units, or aftermarket coil-spring conversion kits.
- Head Gasket FailureSerious
The Rover K-Series 16-valve petrol engine is notorious for head gasket failure, compounded in the MGF by its mid-engine layout, small 4.5-litre coolant volume, and long coolant pipe runs. Early engines used plastic dowels that allowed cylinder head shift, while any minor coolant weep quickly causes local overheating, annealing the aluminium head casting and breaching the elastomer gasket seals. Rectification requires skimming the head, upgrading to steel locating dowels, fitting an uprated multi-layer steel (MLS) gasket with an uprated lower oil rail, and bleeding cooling air locks meticulously.
- Underfloor Coolant Pipe CorrosionSerious
The MGF's mid-mounted engine requires twin metal coolant pipes running under the floorpan to connect the engine bay to the front-mounted radiator. Original factory pipes were fabricated from mild steel and routed directly through the underbody slipstream where they endure constant bombardment from UK road spray, grit, and winter road salt. These pipes rot internally and externally, developing hairline pinholes or sudden seam ruptures that dump engine coolant on the road. Because coolant capacity is low, sudden loss causes instant overheating and head gasket failure before the driver notices.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.