2023 Audi Q3 Technik 35 Tfsi Mhev S-A 1.5L Petrol · WD23 TYP

The most recent MOT test conducted on 19 June 2026 resulted in a pass, indicating that the vehicle met the necessary safety and environmental standards at the time of inspection. Based on the provided history, the maintenance trend appears stable, as there are no recorded failures or recurring structural defects. The single advisory regarding thinning rear brake pads is a common consumable wear item for a vehicle of this age and does not suggest a pattern of neglect, but rather a standard progression of wear that is typical for a well-used modern vehicle. The recorded mileage of 32,066 miles over approximately three years equates to an annual average of roughly 10,689 miles. This is considered typical usage for a UK-based driver and suggests a balanced driving profile, likely including a mix of motorway and urban routes. This level of mileage is ideal as it is high enough to prevent the mechanical issues associated with long periods of standing, such as brake seizure or battery degradation, yet it remains low enough that major drivetrain or suspension components should still be in good condition without excessive wear. A prospective buyer should prepare for the imminent replacement of the rear brake pads as noted in the advisory. This indicates that the braking material is nearing its service limit and will soon require attention to avoid a failure at the next MOT. During a test drive, listen for any high-pitched squealing or grinding noises when applying the brakes, which could indicate metal-on-metal contact. You should also check for any pulsation or shuddering through the brake pedal, which may suggest that the rear brake discs have become unevenly worn or have suffered from heat spotting due to the thinning pads. It is also advisable to check for any signs of binding calipers which can cause uneven wear. In addition to the braking system, you should verify the service book to ensure that oil and filter changes have been performed at the correct intervals. Given the mild hybrid technology, ensure the vehicle's electrical systems and battery health are functioning correctly, as these are integral to the drivetrain's efficiency. You should also inspect the tyres for even tread wear and check the suspension for any clunks or knocks when driving over uneven surfaces, which would indicate worn bushes or coil springs. Finally, check for any signs of fluid leaks or corrosion around the underside of the vehicle to ensure overall structural integrity.