2004 Nissan Micra 1.2L Petrol · WD53 KXR

The latest MOT test conducted on 10 May 2025 resulted in a pass with no defects recorded. This follows a consistent pattern over the previous four years, with the 2024, 2023, and 2022 tests all passing without any recorded defects or advisories. From a regulatory standpoint, the maintenance trend is exceptionally stable, suggesting a vehicle that has been consistently maintained to a standard that exceeds the minimum legal requirements for roadworthiness. The recorded mileage of 74,755 miles is notably low for a vehicle of this age, averaging approximately 3,398 miles per year over 22 years. While this indicates limited wear on the internal engine components and the drivetrain, such low annual usage often suggests the vehicle has been used for short urban trips or has spent significant periods stationary. This usage profile shifts the mechanical risk from wear-and-tear to age-related degradation of rubber and fluid components. A prospective buyer should prioritize a physical inspection of all rubber components. Check the tyre sidewalls for perishing or hairline cracking, as tyres can become unsafe due to age even if the tread depth remains legal. Inspect the brake discs for heavy surface corrosion or evidence of binding calipers, which is common in vehicles that stand for long periods. The 12V battery health should be verified, as infrequent charging cycles in low-mileage cars often lead to premature failure. It is essential to verify the service history to ensure fluids have been changed according to calendar intervals rather than mileage. Brake fluid is hygroscopic and must be replaced periodically to prevent internal corrosion of the braking system. During the test drive, listen for suspension clunks or stiffness in the steering, which may indicate that rubber suspension bushes have dried out and perished. Finally, examine the exhaust system and underbody for structural corrosion, as short journeys often prevent the exhaust from reaching operating temperature, leading to internal moisture buildup and premature rusting.