2023 Peugeot 308 GT Puretech S/S Auto 1.2L Petrol · WJR 53

A clean MOT history to date indicates that no roadworthiness‑related defects have been recorded for this 2023 Peugeot 308 GT PureTech, with the latest test on 23 March 2026 passing without comment. The absence of advisories or failures across the available record suggests that, at least at the time of testing, the vehicle met the statutory safety and emissions standards. At 13 485 mi the car averages roughly 4 500 mi per annum, which is well below the typical UK usage pattern for a three‑year‑old family hatchback. Such low annual mileage points to relatively light duty, but it also raises the possibility of periods of inactivity. Light use generally translates to reduced wear on brake pads, tyre tread and clutch components, yet prolonged standstill can accelerate the ageing of rubber seals, suspension bushings and battery plates. When you inspect the car, pay particular attention to the condition of the front and rear suspension bushes and the coil‑spring mounts; any creaking or knock when traversing a speed bump may signal early degradation that would not have been captured by the MOT. Examine the brake discs and pads for uneven wear or surface glazing, and test the pedal for a firm, consistent feel without pulsation, which would reveal hidden disc or caliper issues. Verify that the tyres show uniform tread depth and no sidewall cracking, and check for flat‑spotting that can develop after long periods of storage. A short road test should include a steady‑state acceleration to confirm smooth power delivery, a brief hard stop to assess brake response, and a gentle left‑right sweep at moderate speed to detect any steering pull or vibration. Listening for any abnormal noises from the engine bay, especially around the exhaust manifold and oil filter housing, will help expose latent oil‑mist or leak concerns that the MOT would not have flagged. Confirm that the battery holds charge and that all lights, including the ABS warning and emission indicator, illuminate briefly on start‑up and then extinguish, confirming the electronic systems are functioning as expected.