2013 Fiat 500 1.2L Petrol · WM13 KBF

The vehicle is currently roadworthy but presents a history of significant recent decline in maintenance standards. While it passed its most recent test in November 2025 at 82,069 miles, this followed a major failure just eight days prior at 82,037 miles. That failure revealed a multitude of critical defects, including structural corrosion, suspension collapse, and braking failures. Although the immediate issues were rectified to secure compliance, the volume of faults in a single own suggests a reactive rather than proactive approach to mechanical upkeep. The mileage pattern is notably consistent with a 13-year-old vehicle, averaging approximately 6,300 miles per year. Between February 2023 at 72,564 miles and November 2024 at 78,026 miles, the car covered roughly 5,500 miles, indicating relatively low annual usage. However, the low mileage has not prevented age-related degradation, as evidenced by the recurring reports of perished tyres and worn bushes. The periods of standing may have exacerbated the oxidation of rubber components and metal surfaces. A buyer must conduct a thorough inspection of the structural integrity, specifically focusing on the nearside front sill. The 2025 failure identified this area as corroded to the point of significantly reduced rigidity, which is a major concern for an older Fiat. Additionally, the rear sub-frame was noted as corroded in 2024, and the rear artwork was described as deformed in 2023. These areas should be checked for active rust growth that may have worsened beyond the previous advisories. The suspension and braking systems require close scrutiny. The history shows a pattern of worn Macpherson way top bushes, suspension arm pins, and track rod ends, alongside a binding front brake and an inoperative parking brake. The recurring oil leak noted in every test since 2023 indicates a long-standingion that should be monitored for volume. Given the major exhaust leak failure in November 2025, the entire exhaust system should be verified to ensure it is properly secured and free of further degradation.