2009 Vauxhall Combo 1.2L Diesel · WN09 FZA

The Vauxhall Combo has demonstrated a stable roadworthiness record over the last five years, with both its most recent MOT (January 2026) and the preceding test (December 2021) resulting in clean passes at 70,605 and 68,085 miles respectively. No defects or advisories were recorded during either inspection, indicating the vehicle has not experienced any recurring mechanical or structural issues that would warrant concern. The absence of failings suggests the previous owner adhered to basic maintenance, though this does not preclude hidden wear—particularly in areas like suspension bushes, coil springs, or brake caliper binding—which are not always detectable without a thorough mechanical examination. The recorded mileage of 70,605 miles over nearly 17 years equates to an average of approximately 4,153 miles annually, which is unusually low for a vehicle of this age. The gap between the December 2021 and January 2026 tests—nearly four years—covers just 2,520 miles, implying the car was either stored for extended periods or used very lightly. Such low mileage can mask deeper issues, as components like suspension mounts and brake pads may have degraded slowly without significant stress. Conversely, the lack of rapid mileage accumulation between tests suggests no urgent need for high-wear part replacement, but it also raises questions about whether the vehicle was driven enough to expose any latent faults. Given the sparse MOT history, a buyer should prioritise an inspection of suspension components, including the condition of bushes, coil springs, and shock absorbers, as these are prone to deterioration even with low mileage. The brakes, particularly the rear calipers, should be checked for binding or uneven wear, as past tests did not flag any issues but wear can develop gradually. Structural integrity, especially around the wheel arches and sills, should be examined for corrosion, which can compromise safety over time. While the MOT record is reassuring, a professional inspection is essential to verify the vehicle’s true condition beyond the limited scope of the test.