2012 Mercedes-Benz Sprinter 513 CDI 2.1L Diesel · WN12 CGU

The 2012 Mercedes-Benz Sprinter 513 CDI last underwent an MOT test on 28 March 2025 at 156,675 miles, achieving a clean pass with no defects recorded. This represents a relatively short interval of just over four months since the last inspection, which is standard for a vehicle of this age and mileage. The absence of any advisories or failings in the most recent test suggests the tester did not identify any immediate fail-safe issues, though this does not preclude latent problems. The lack of historical data beyond this single entry means there is no visible trend of recurring faults or progressive wear, which could either indicate diligent maintenance or a complete absence of prior MOT records. Buyers should treat this as a baseline rather than a comprehensive history. The recorded mileage of 156,675 miles over approximately 14 years equates to an average of around 11,200 miles per annum, which is typical for a commercial or mixed-use vehicle of this age. The most recent MOT test was conducted at the upper end of the typical annual mileage range, suggesting the vehicle has been in consistent use rather than stored or underutilised. Without earlier MOT records, it is impossible to determine whether mileage accumulation has been steady or whether there were periods of rapid wear. The lack of a pre-2025 MOT history means critical components such as suspension bushes, coil springs, and drivetrain elements cannot be assessed for progressive degradation. Given the sparse MOT history, an in-person inspection should prioritise high-wear areas that are not always captured in a standard MOT. The suspension—particularly the rear axle and bushings—should be closely examined for excessive play or corrosion, as these are common failure points in high-mileage Sprinters. Brake discs and calipers, especially the rear, warrant scrutiny for uneven wear or binding, which could indicate past neglect or improper servicing. Structural integrity of the chassis and subframe should also be assessed for signs of rust or distortion, particularly around wheel arches and the exhaust system. The absence of MOT advisories does not guarantee these areas are sound, so visual and functional checks are essential.