2020 Ford Transit 350 Leader Ecoblue 2.0L Diesel · WN70 VBC

The latest MOT test on 24 October 2025 resulted in a pass with no defects recorded. Reviewing the historical data, the vehicle has maintained a consistently clean record since 2023. Although a failure was noted on 17 October 2025, the absence of listed defects suggests a minor issue that was rectified rapidly. Overall, the maintenance trend is stable, indicating that the vehicle has been kept in a roadworthy condition according to DVSA standards. The vehicle has accumulated 104,940 miles over approximately six years, averaging roughly 17,490 miles per year. This is a high annual usage rate, typical of a commercial vehicle used for long-distance haulage or fleet duties. Such high mileage implies accelerated wear on all primary consumables and drivetrain components. While the MOT record is clean, the mechanical stress associated with this level of usage means the vehicle is more likely to require significant preventative maintenance on its chassis and engine components compared to a lower-mileage example. Given the lack of recorded advisories, the buyer must perform a rigorous physical inspection of high-wear items. Particular attention should be paid to the suspension bushes and ball joints, as these often degrade under high mileage without immediately triggering an MOT failure. During a test drive, listen for any clunks or knocks when traversing uneven road surfaces and feel for any vibration in the steering wheel, which may indicate worn wheel bearings or alignment issues. The brake discs should be inspected for thinning or the development of a lip, and the calipers should be checked for binding to ensure there is no premature pad wear. Furthermore, the service history must be meticulously verified to ensure the EcoBlue engine has received oil and filter changes at the appropriate intervals. It is critical to confirm whether the timing belt and water pump have been replaced in accordance with the manufacturer's mileage or age guidelines, as these are vital for engine integrity. Inspect the tyres for uneven wear patterns and check the chassis for any signs of surface corrosion or structural fatigue. Finally, verify the condition of the 12V battery and ensure that all fluids are clean and topped up, as high-mileage commercial vehicles can often suffer from neglected calendar-based maintenance.