2026 Dacia Sandero Stepway Extreme TCE Petrol · WR26 GDA

This vehicle currently has no recorded DVSA MOT history, which is expected given its 2026 registration date as the first statutory inspection is not required until the third anniversary of its registration. Consequently, there is no historical data to establish a maintenance trend or identify recurring faults. The vehicle is effectively in its initial operational phase and should still be covered by the manufacturer warranty, meaning its roadworthiness is currently predicated on factory standards and adherence to the early service schedule. There is insufficient mileage data available to determine the annual usage rate or identify any abnormal patterns of accumulation. For a vehicle of this vintage, the primary concern for a buyer is ensuring that the mileage is consistent with the vehicle's stated history and that it has not been subjected to excessive short-trip urban driving, which can lead to premature carbon build-up in the TCE engine. Verification of the odometer is essential to confirm the car has not been used for high-intensity commercial purposes or long-distance fleet work. In the absence of MOT advisories, the inspection should focus on the physical condition and the verification of the service book. Ensure that the initial delivery inspection was completed and that any early-life service requirements have been met. Pay close attention to the tyre sidewalls and tread; while the tyres should be nearly new, vehicles that have sat stationary on a dealership forecourt for extended periods can develop flat spots or early perishing. Check for any signs of binding calipers or surface corrosion on the brake discs, which can occur if the vehicle has been stored in a damp environment without regular use. During a test drive, listen for any unusual noises from the suspension bushes or coil springs, although these should be in prime condition. Verify the smooth operation of the gearbox and the responsiveness of the engine to ensure no early mechanical failures are present. Check the 12V battery health and ensure all electronic systems, including the infotainment and driver aids, are functioning correctly. Finally, confirm that the fluid levels, particularly the engine oil and coolant, are correct and that there are no visible leaks beneath the engine bay, as this will confirm the vehicle has been maintained to the required standard.