2019 Audi A5 2.0L Petrol · WR69 VOA

The 2019 Audi A5 shows a stable roadworthiness trend, with the most recent MOT test on 1 September 2025 at 47,564 miles resulting in a clean pass—no defects or advisories recorded. This consistency over the past two years suggests the vehicle has avoided major mechanical failures, though the single failure in November 2024 at 41,268 miles (despite passing just nine days earlier) warrants scrutiny. The absence of recurring advisories or defects in recent tests implies that any issues were either minor or promptly addressed, but the rapid retest indicates a potential oversight in pre-MOT preparation or a minor but persistent fault that required attention. Mileage progression reveals a steady accumulation of around 6,800 miles annually, which is typical for a vehicle of this age. The gap between the 2023 and 2022 MOTs (11,263 miles in 12 months) aligns with this pattern, while the 2024 tests show a slight acceleration—nearly 10,000 miles between November and December. This does not suggest excessive wear but does indicate the vehicle has been in regular use. The lack of extended periods of inactivity or unusually low mileage intervals suggests no prolonged neglect of consumables like fluids or tyres. Given the clean MOT history, the primary focus for an in-person inspection should centre on suspension integrity and brake condition. The 2024 failure—despite passing just days prior—hints at a potential brake-related issue, such as uneven wear or binding calipers, which could recur if not addressed. Inspect the rear brake system closely, as the testers may have flagged a minor but persistent problem. Additionally, check for suspension bush wear, particularly at the rear, where excessive play could contribute to handling inconsistencies. Corrosion at wheel arches, subframe, and exhaust mounts should also be examined, as these are common failure points on this model. The absence of advisories in recent tests does not preclude gradual wear, so a thorough check of coil springs and shock absorbers is advisable. Finally, verify tyre tread depth and uniformity, as the vehicle has accumulated significant mileage since its last major service.