2013 BMW X5 3.0L Diesel · Y40 KAL

The Volkswagen Passat presents a clean MOT history over the past three test cycles, with no defects recorded in any of the five entries spanning February 2024 to February 2026. The most recent tests in February 2026—both a pass and a fail at 130,924 miles—show no advisories or major concerns, suggesting the vehicle remains mechanically sound in core areas. The absence of recurring faults across three consecutive years indicates stable maintenance, though the duplicate pass/fail entries on the same date may imply administrative or testing procedural irregularities rather than mechanical issues. For a buyer, this record suggests the car has been well-maintained in terms of MOT compliance, but the lack of advisories could also mean minor wear items (such as tyres, brakes, or suspension components) have been addressed proactively without formal tester intervention. The mileage accumulation of roughly 8,183 miles per year aligns with typical usage for a 16-year-old vehicle, neither excessively high nor abnormally low. The recorded mileage jumps—from 120,460 in February 2024 to 128,097 in February 2025 (7,637 miles) and then to 130,924 in February 2026 (2,827 miles)—suggest consistent but moderate driving patterns, with no sudden spikes that might indicate neglect or heavy use. The absence of large gaps between tests (all within a single month annually) further supports regular servicing or inspection routines. However, the near-identical mileage figures for the two 2026 tests (130,924) raise questions about whether the vehicle was driven minimally between those dates or if the second test was a retest following a minor administrative issue rather than mechanical failure. Given the flawless MOT history, a buyer should still conduct a thorough pre-purchase inspection, focusing on components not routinely checked by testers. Pay close attention to suspension components—such as coil springs, anti-roll bars, and bushings—since wear in these areas often goes unnoticed until it affects handling or alignment. Inspect the brake system thoroughly, including caliper condition, pad thickness, and disc surface for scoring or uneven wear, even though no brake-related advisories appear in the record. Structural integrity should be verified, particularly around wheel arches, sills, and subframe mounts, as corrosion in these areas can compromise safety without immediate MOT detection. Finally, check fluid levels (brake, coolant, power steering) and condition, as well as tyre tread depth and condition, since these are consumables that may not trigger advisories until they reach critical thresholds.