2011 Vauxhall Corsa 1.0L Petrol · YB60 HSF

The vehicle currently holds a roadworthy status following a clean pass in April 2025 at 125,981 miles. This represents an improving maintenance trend compared to the period of mechanical neglect between 2022 and 2023. While the car previously suffered from multiple failures involving safety components, the most recent inspection indicates that the owner has addressed the outstanding defects and brought the vehicle back to a passing standard. At 125,981 miles over fifteen years, the Corsa has averaged approximately 8,400 miles per year, which aligns with typical national averages for a vehicle of this age. The data shows consistent usage, with roughly 5,300 miles covered between November 2022 and December 2023, and another 6,600 miles in the year preceding the last test. This regular mileage suggests the car has not sat stationary for long periods, which is generally beneficial for the preservation of rubber components and mechanical braking systems. A buyer must pay close attention to the front suspension geometry, as the nearside front lower ball joint was flagged for slight play in 2022 and progressed to excessive wear by late 2023. Although the recent test passed, the recurring nature of this fault necessitates a physical inspection for continued play in the steering arm or bushings to ensure the repair was comprehensive. The 2022 failure regarding an inoperative engine malfunction light also suggests a history of electrical or sensor issues that should be verified with a diagnostic scan to ensure no hidden fault codes are currently active. The 2023 record also highlighted low tyre tread and perishing sidewalls, which indicates a previously reactive approach to basic consumable maintenance. The buyer should check the current tyre depth and condition for dry cracking, as the age of the vehicle makes rubber degradation likely. Given the previous failure for a missing brake pedal anti-slip provision in 2023, a thorough check of the braking system's mechanical integrity is required to confirm the system remains fully functional and compliant.