2016 Subaru WRX 2.5L Petrol · YD16 SPX

The vehicle is currently roadworthy following its most recent MOT test on 2025-07-02, which it passed at 66,764 miles. However, the maintenance trend shows a concerning deterioration in the past year, with the previous test in July 2024 resulting in a failure due to multiple tyre issues, including nearside and offside rear tyres worn close to the legal limit and a structural defect on the offside rear inner tyre. The failure also noted an inoperative registration plate lamp and a child seat obstructing the inspection of rear adult seatbelts. While the 2023 test was clean, the repeated tyre-related failures suggest ongoing neglect or aggressive driving habits, raising questions about the vehicle’s long-term reliability. The mileage progression indicates a consistent annual usage of approximately 6,676 miles, which is typical for a vehicle of this age. The gap between the 2022 and 2023 MOTs is notable—nearly 14 months—suggesting a period of reduced use or possible storage. However, the vehicle has accumulated 7,910 miles in just 13 months between the 2023 and 2025 tests, indicating a recent increase in usage. This rapid accumulation, combined with the tyre wear issues, implies that the vehicle may have been driven heavily in the past year without adequate maintenance. Buyers should conduct a thorough inspection of the suspension and braking systems, as the repeated tyre failures could indicate underlying issues such as misalignment or worn suspension components. Pay close attention to the rear suspension, particularly the coil springs and bushes, which are common wear points on Subaru WRX models. The structural defect on the offside rear inner tyre suggests potential wheel alignment or suspension problems that may have contributed to uneven wear. Additionally, inspect the exhaust system for corrosion and check the rear brake calipers for binding, as these are frequent concerns on high-mileage vehicles. The inoperative registration plate lamp should be repaired immediately to ensure compliance with roadworthiness standards.