2002 Peugeot 106 1.1L Petrol · YM02 LZJ
2002 Peugeot 106 (1.1L, petrol). First registered 01 Jul 2002. Recorded mileage 75,055 miles. MOT expired on 28 Jul 2017.
- Make & Model
- PEUGEOT 106
- Year / Origin
- 2002 · Sheffield
- Safety Recall
- Unknown
- MOT Status
- Expired on 28 Jul 2017
- Road Tax
- Untaxed (04 May 2017)
- Recorded Mileage
- 75,055 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- PETROL · 1.1L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
YM02 LZJ Key Findings
- 20 MOT tests recorded
- Latest MOT passed on 08/07/2016
- 75,055 miles recorded at latest MOT
- 8 historical MOT failures
- 2 defects noted at the latest MOT
- Recurring lighting items (6 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
YM02 LZJ MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
20 MOT tests are recorded for this 2002 Peugeot 106 (YM02 LZJ) between July 2005 and July 2016.
The record contains 12 passes and 8 failures.
The most recent test on 08 July 2016 was a pass, although the earlier record includes 8 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Lighting (6 issues), Brakes (5 issues), Tyres (4 issues), Exhaust & Emissions (3 issues), Windscreen (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 10 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Nearside Rear Brake pipe excessively corroded (3.6.B.2c)”; “Nearside Front Steering rack gaiter split (2.2.D.2d)”; “Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)”.
YM02 LZJ Mileage History
- 29/07/200521,403 mi
- 28/07/200627,222 mi+5,819 mi
- 28/07/200627,222 mi
- 28/07/200732,572 mi+5,350 mi
- 28/07/200732,572 mi
- 28/07/200838,246 mi+5,674 mi
- 28/07/200943,366 mi+5,120 mi
- 29/07/200943,366 mi
- 27/07/201050,535 mi+7,169 mi
- 28/07/201050,535 mi
- 16/07/201154,284 mi+3,749 mi
- 26/07/201154,414 mi+130 mi
- 18/07/201259,506 mi+5,092 mi
- 19/07/201259,566 mi+60 mi
- 06/07/201363,599 mi+4,033 mi
- 12/07/201467,187 mi+3,588 mi
- 17/07/201467,228 mi+41 mi
- 10/07/201571,030 mi+3,802 mi
- 08/07/201675,055 mi+4,025 mi
- 08/07/201675,055 mi
Average of roughly 4,903 miles per year across 20 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 106
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 106
Known issues reported by owners and MOT testers.
- Rear Trailing Arm Axle Bearing Seizure(Serious)
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant Leaks(Serious)
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant Wear(Moderate)
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (YM02 Series)
Vehicles registered in the same regional DVLA batch as YM02LZJ.
LAND ROVER
RANGE ROVER SPORT HSE D MHEV A
CATERHAM
SUPER 7
JAGUAR
S-TYPE
AUTO-TRAIL
MOTOR CARAVAN
FIAT
DUCATO
SEAT
IBIZA
VOLKSWAGEN
GOLF
PIAGGIO
PX 200 E
TOYOTA
RAV-4
VOLKSWAGEN
PASSAT
SUZUKI
DR-Z400S
TOYOTA
CELICA
PEUGEOT 106 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2002 model year cars.
- Rear Trailing Arm Axle Bearing SeizureSerious
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant LeaksSerious
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant WearModerate
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.