2013 Vauxhall Movano 2.3L Diesel · YN13 PHJ

The most recent MOT test on 28 July 2026 shows a pass, but the vehicle exhibits a worsening trend regarding component wear and corrosion. While the 2024 test recorded no defects, the subsequent inspections have introduced several advisories. The July 2026 record specifically flags corrosion on both the nearside rear and offside front brake pipes, alongside play in the offside front lower sub-frame ball joint. This follows a 2025 advisory regarding a chafing servo pipe, indicating a pattern of developing issues within the braking and hydraulic systems. The vehicle has covered 318,164 miles over approximately 13 years, averaging roughly 24,474 miles per year. This high annual mileage suggests heavy commercial use, which correlates with the mechanical wear noted in the recent records. The data shows consistent annual testing from 2023 through 2026, providing a continuous look at the vehicle's condition as it reaches higher mileage thresholds. A prospective buyer should conduct a thorough physical inspection of the braking system, specifically checking the condition of the brake pipes and the integrity of the hydraulic lines to ensure the reported corrosion and chafing have been addressed. The tester also flagged an offside front inner tyre worn close to the legal limit, so the remaining tread depth and tyre age should be verified. Given the advisory regarding the offside front lower sub-frame ball joint, the suspension components and steering linkage require close examination for excessive movement or play. The 2024 failure for a leaking or fractured hydraulic actuator or servo pipe highlights a previous significant issue with the braking or air system. While this was cleared by the 2025 pass, the recurring advisories concerning brake pipes and servo pipes suggest that the hydraulic and pneumatic components are a primary area of concern. Checking for signs of fluid leaks or structural degradation around the sub-frame is necessary to assess the current state of the chassis and suspension mounting points.