2015 Jaguar XF 2.2L Diesel · YR15 LHA

The most recent MOT inspection on 31 March 2026 resulted in a pass with no recorded defects. The overall maintenance trend for this vehicle is stable and shows a positive trajectory. Following a failure in 2021 regarding a tyre defect and a brake pad advisory, the vehicle has achieved five consecutive clean passes. This suggests that any identified wear or component failures were addressed promptly and that the vehicle has been maintained to a high standard in recent years. The recorded mileage of 51,074 miles indicates an average annual usage of approximately 4,643 miles, which is notably low for an eleven-year-old vehicle. While this low mileage implies reduced wear on the engine, gearbox, and drivetrain, it also suggests the vehicle may have spent extended periods stationary. This usage profile means that mechanical wear is less of a concern than the degradation of components caused by age and lack of regular movement, such as rubber perishing or fluid contamination. When inspecting the vehicle, you must look beyond tread depth and check the tyres for sidewall cracking or perishing, which occurs as rubber ages. During the test drive, listen for any suspension clunks or knocks, as suspension bushes and mounting components can harden and crack over time even with low mileage. Pay close attention to the braking system; check the discs for heavy corrosion or pitting and listen for any squealing or binding from the calipers, which can occur if the vehicle has not been driven frequently enough to clear surface oxidation. It is critical to verify that the service history reflects time-based maintenance rather than solely mileage-based intervals. Fluids such as brake fluid, engine oil, and coolant should be replaced according to the manufacturer's calendar-based schedule to prevent chemical breakdown or moisture ingress. Furthermore, check the health of the 12V battery, as low-use vehicles are prone to discharge and capacity loss. Finally, inspect all rubber hoses and seals for signs of brittleness to ensure the structural and fluid integrity of the engine bay remains intact.