IsItAGoodCar
Reliability Guide

Common Problems with the
2008 Abarth Grande Punto / Punto Evo (Type 199)

The Abarth brand was officially relaunched in the UK in July 2008 with the Grande Punto. Powered by a 155bhp 1.4 T-Jet turbocharged engine mated to a 6-speed manual gearbox, it featured 10mm lower suspension, 4-piston Brembo front brakes, aggressive body styling without Fiat badges, and the dealer-fit 180bhp Esseesse performance upgrade kit.

What changed for 2008

  • •UK launch of standalone Abarth brand featuring 155bhp 1.4 T-Jet turbocharged engine
  • •M32 6-speed manual transmission, 17-inch alloy wheels, and 4-piston Brembo front brakes
  • •Sport Boost button altering electric power steering weighting and delivering 230Nm torque
  • •Optional dealer-fit Esseesse upgrade package boosting output to 180bhp with Garrett turbo

Common MOT watch-outs

  • !Front suspension drop link and wishbone ball joint wear causing knocking over bumps
  • !Fractured front coil springs near the lower suspension spring pans
  • !Electric power steering torque sensor failure triggering red dashboard steering warning
2
Known Issues
2
Serious
0
Moderate
0
Minor

All Known Issues

M32 6-Speed Manual Gearbox Bearing Failure

SeriousGearbox & Transmission

The GM-FPT M32 6-speed manual gearbox fitted to Grande Punto and early Punto Evo models is prone to premature wear and pitting of the output shaft and 6th gear end-casing bearings. Excessive factory preload tolerances, poor lubrication to the upper bearings, and thermal fluid breakdown lead to spalling of the bearing tracks. As the bearings degrade, a pronounced whine develops in 1st, 2nd, and 6th gear, accompanied by noticeable gearstick twitching under acceleration and overrun. If ignored, the bearings disintegrate completely, punching through the aluminium casing and causing total transmission failure.

Est. Repair Cost: £550–£1,400
Warning Signs:

Whining or droning noise in 1st, 2nd, and 6th gear that increases with road speed, Visible twitching or jumping of the gear selector lever when applying or releasing the throttle, Difficulty or crunching when engaging 1st, 2nd, or reverse gear when warm, Metallic grinding noise from the transmission bellhousing during motorway driving

What to Inspect:
  • During the test drive, place light fingertip pressure on the gear knob in 1st and 6th gear to observe any fore-aft movement under hard acceleration
  • Drive at 50–60mph in 6th gear and gently modulate the throttle, listening for a high-pitched bearing whine
  • Inspect the aluminium end-casing behind the front nearside wheel arch for transmission fluid weeping
  • Check the service history for documentation of gearbox bearing overhaul or upgraded synthetic fluid changes
Verified by IsItAGoodCar Research TeamUpdated

Electric Power Steering Column Torque Sensor Failure

SeriousSteering

The electric power steering (EPS) column unit on the Type 199 platform suffers from failure of the internal steering angle and torque position sensors. Thermal cycling and vibration fatigue the delicate internal potentiometer tracks and solder connections on the column ECU. The fault initially presents intermittently, often causing the steering to feel heavier in one direction before progressing to sudden total loss of steering assistance. When the system fails, a red steering wheel warning illuminates on the instrument cluster, making the vehicle exceptionally heavy to steer at low speeds.

Est. Repair Cost: £350–£750
Warning Signs:

Sudden and complete loss of power steering assistance while driving, Illuminated red steering wheel warning icon on the instrument cluster, Asymmetrical steering resistance making the wheel significantly heavier to turn in one direction, Intermittent shuddering or clicking sensations through the steering wheel rim when turning

What to Inspect:
  • Start the engine from cold and turn the steering wheel lock-to-lock while stationary to verify smooth, quiet assistance
  • Press the Sport or Sport Boost button to confirm dynamic steering weighting alters cleanly without triggering warnings
  • Scan the vehicle OBD system for stored steering fault codes C1001 (internal control unit fault) or C1002 (torque position sensor fault)
  • Verify whether the vehicle is fitted with a reconditioned exchange steering column
Verified by IsItAGoodCar Research TeamUpdated

Buying Tips for 2008 Abarth Grande Punto / Punto Evo (Type 199)

  • Listen carefully for high-pitched whining from the gearbox in 6th gear at motorway cruising speeds
  • Ensure the cambelt and water pump have been replaced within the recommended 4-year or 50,000-mile interval
  • Inspect the rear exhaust backbox and mounts for corrosion caused by UK winter road salt