Reliability Guide

Common Problems with the
2022 Cupra Born

We've identified 5 known issues that can affect the 2022 Cupra Born. None are considered critical, but they're worth knowing about before you buy.

5
Known Issues
0
Serious
0
Moderate
5
Minor

All Known Issues

Software Lag and Connectivity

MinorElectrics & Electronics

The MEB platform software (Shared with VW ID.3/4) has been improved but can still suffer from slow boot-up times.

Est. Repair Cost: £0 (Software update)

Drums Brake Corrosion (Rear)

MinorBrakes

Like the VW ID.3, the Born uses rear drum brakes. Due to regenerative braking, they are rarely used and can develop surface corrosion or sticking.

Est. Repair Cost: £100–£250

Charging Port Flap Sticking

MinorElectrics & Electronics

The electronic charging port flap can become stuck or fail to open, particularly in cold weather or after prolonged exposure to moisture.

Est. Repair Cost: £50–£200

Four-Seat Limitation (77 kWh Battery)

MinorInterior & Trim

The 77 kWh battery models are limited to four seats due to battery packaging, with no rear middle seat. This is a design constraint, not a fault, but catches many buyers off guard.

Est. Repair Cost: £0 (Design packaging constraint)

Range Loss in Cold Weather

MinorElectrics & Electronics

The Born's WLTP range can drop significantly in winter, with real-world cold-weather range often 25-35% lower than official figures due to battery chemistry and heating demands.

Est. Repair Cost: £0 (Normal cold weather EV characteristic)

Buying Tips for 2022 Cupra Born

  • Check the infotainment system responsiveness; early cars were particularly laggy before major software updates.
  • Inspect the "slider" controls under the screen; they are not backlit on early models and can be finicky.
  • Ensure the car comes with all its charging cables (Type 2 and 3-pin if included).
  • Verify the battery health report if buying used.