IsItAGoodCar
Reliability Guide

Common Problems with the
2020 Polestar 1

The Polestar 1 launched in the UK during 2020 as a strictly limited-production luxury PHEV GT halo car. Featuring a carbon-fibre composite body, 609hp twincharged powertrain, and a 34kWh battery delivering 78 miles of electric range, it introduced the standalone Polestar brand to UK buyers in left-hand drive configuration.

What changed for 2020

  • •UK customer deliveries commence for Polestar's debut 609hp plug-in hybrid halo grand tourer
  • •Carbon-fibre reinforced polymer (CFRP) body structure bonded to Volvo's Scalable Product Architecture (SPA)
  • •Tri-motor hybrid powertrain pairing a 2.0-litre twincharged petrol engine with dual torque-vectoring rear electric motors
  • •34kWh battery capacity offering a segment-leading 78-mile WLTP pure-electric driving range with 50kW DC rapid charging

Common MOT watch-outs

  • !Fluid misting or leakage from the manually adjustable Öhlins Dual Flow Valve suspension dampers
  • !Corrosion or surface pitting on the large front Akebono brake discs due to frequent regenerative braking usage
  • !Uneven tyre shoulder wear across the wide 21-inch wheels caused by high vehicle mass and instant electric torque
4
Known Issues
1
Serious
3
Moderate
0
Minor

All Known Issues

High-Voltage Battery Cell Defect / Thermal Runaway Overheating

SeriousElectrics & Electronics

DVSA safety recalls R/2022/358 and R/2023/156 (manufacturer campaign code R10216, superseding interim software limit R10202) were issued for 2020–2021 Polestar 1 models. A manufacturing defect in the high-voltage battery cells can cause internal short circuits or thermal runaway when the 34kWh pack is charged to maximum capacity, presenting a potential fire risk. An initial stopgap software update capped charging state-of-health, while the permanent remedial action requires full inspection and cell module or complete traction battery pack replacement at an authorised Polestar specialist facility.

Est. Repair Cost: £0 (Safety recall)
Warning Signs:

High-voltage battery service warning or reduced propulsion message on the instrument cluster, Traction battery charge level restricted or unexpectedly terminating prior to reaching 100% capacity, Cooling fans running loudly at maximum speed during or immediately following AC charging

What to Inspect:
  • Verify on the GOV.UK vehicle recall service that DVSA recall campaigns R/2022/358 and R/2023/156 have been formally completed
  • Request main-dealer Polestar documentation proving traction battery module replacement or software remediation
Verified by IsItAGoodCar Research TeamUpdated

Öhlins DFV Manual Damper Seizure and Fluid Weeping

ModerateSuspension & Chassis

The Polestar 1 features bespoke Öhlins Dual Flow Valve (DFV) shock absorbers with 22 manual click-adjuster settings. In the UK climate, the exposed adjuster dials—especially on the rear turrets which require jacking up the car to access behind the wheel arches—are prone to seizing from road salt, grit, and moisture corrosion if left untouched. Furthermore, high kerb weight (2,350kg) combined with UK potholes can cause seal weeping and premature fluid leakage on the front struts, leading to uneven damping, MOT advisories, and substantial replacement expenses.

Est. Repair Cost: £650–£1,400
Warning Signs:

Firm, jarring ride or audible knocking from the suspension over road imperfections, Manual click-adjuster dials on the damper tops seized solid or impossible to turn by hand, Visible hydraulic fluid misting or oily film on the damper bodies and spring seats

What to Inspect:
  • Inspect front damper tops under the bonnet to test whether the gold click-adjuster dials rotate freely through their 22 detents
  • Check damper bodies behind the alloy wheels with a torch for fluid weeping or blown seals
  • Review recent MOT test certificates for advisories regarding suspension fluid leakage
Verified by IsItAGoodCar Research TeamUpdated

Onboard Charger (OBC) and High-Voltage AC Charging Aborts

ModerateElectrics & Electronics

The Polestar 1 utilizes a dual-pack 34kWh battery architecture supporting both AC Level 2 charging and rare-for-PHEVs 50kW DC rapid charging via CCS. Owners and technical reports note high-voltage onboard charger (OBC) communication errors and contactor faults that cause charging sessions to fail immediately upon plug-in or abort mid-cycle on standard UK 7kW home wallboxes. Faulty charging port solenoids and OBC firmware handshakes often require module updates or complete OBC hardware replacement out of warranty.

Est. Repair Cost: £450–£1,200
Warning Signs:

Charging indicator LED pulsing red or flashing amber at the charge socket instead of steady green, Charging session initiates for 30–60 seconds then abruptly trips the home wallbox or terminates, Charging error - check power supply error message illuminated on the digital instrument cluster

What to Inspect:
  • Connect the vehicle to a Type 2 AC wallbox during viewing to confirm a continuous charging handshake
  • Inspect the charging port locking solenoid and socket pins for physical corrosion or heat discolouration
  • Verify with a Polestar service history printout whether the onboard charger module or firmware has been updated
Verified by IsItAGoodCar Research TeamUpdated

Carbon-Fibre Body Panel and Windscreen Surround Stress Fractures

ModerateBodywork & Rust

The Polestar 1's outer skin and structural backbone are fabricated from carbon-fibre-reinforced polymer (CFRP), bonded to a steel and aluminium SPA sub-structure. While exceptionally rigid, the differing thermal expansion rates between the carbon-fibre A-pillars, composite roof structure, and acoustic front windscreen can cause elevated stress at adhesive bond points. In cold and damp UK conditions, hairline surface stress cracks can form in the clear coat along body panel joints, and stone chips on composite panels cannot be repaired with conventional panel beating, requiring specialist structural carbon repair facilities.

Est. Repair Cost: £800–£2,500
Warning Signs:

Fine hairline cracking or lacquer peeling along the composite A-pillar seams and roof junctions, Creaking or ticking noises from the windscreen surround and dashboard cowl over angled driveways, Surface delamination or clouding under stone impact points on carbon-fibre panels

What to Inspect:
  • Carefully inspect all carbon-fibre composite panel shutlines, door apertures, and roof edges for micro-cracks
  • Check the windscreen glass perimeter and bonded A-pillar trims for adhesive separation or moisture ingress
  • Ensure previous bodywork repairs were carried out by a certified carbon-fibre structural repair centre
Verified by IsItAGoodCar Research TeamUpdated

Buying Tips for 2020 Polestar 1

  • Verify that safety recall campaigns R/2022/358 and R/2023/156 for high-voltage battery cell replacement have been completed
  • Check that the manual 22-click Öhlins damper adjuster knobs rotate smoothly and have not seized from UK road grime
  • Ensure comfort with left-hand drive ergonomics and limited rearward boot space before committing to purchase