2002 CITROEN XSARA1.7L Petrol

The Citroën XSara’s most recent MOT history reveals a concerning instability in its roadworthiness, particularly in the final test window. The vehicle failed its test on 27 June 2025 at 134,444 miles despite passing the previous day at the same mileage, a red flag for either a last-minute repair or a critical oversight. No defects were recorded in either the pass or fail, which suggests the failure may have been administrative or related to a minor, non-structural issue that was rectified quickly. The preceding tests from 2024 and earlier show consistent passes with no advisories, indicating a stable pattern until the 2025 anomaly. While the vehicle has technically been on the road since July 2025, the abrupt fail suggests either a rushed inspection or a component nearing failure that wasn’t captured in the record. The recorded mileage of 134,444 miles over 24 years—approximately 5,600 miles annually—is unusually low for a vehicle of this age, suggesting it has spent extended periods either in storage or with minimal use. The gap between tests is also notable: the 2024 to 2025 interval spans 14 months, yet the mileage only increased by 4,686 miles, reinforcing the likelihood of inactivity. This pattern could mean deferred maintenance, as lower mileage often correlates with neglected fluid changes, suspension servicing, or brake wear checks. Conversely, if the vehicle was actively driven, the slow accumulation implies a cautious owner or very light urban use, which might mitigate some wear—but not all. Given the lack of recorded defects, a buyer should prioritise an in-person inspection focusing on high-wear areas that aren’t always MOT-tested. The abrupt 2025 fail warrants scrutiny of brakes, particularly rear calipers or binding mechanisms, as these often cause sudden failures without pre-existing advisories. Suspension components—such as rear bushes, coil springs, and ball joints—should be checked for excessive play or corrosion, especially given the vehicle’s age. Structural integrity is also critical; inspect the sills, wheel arches, and subframe for rust penetration, as this model is prone to corrosion in these areas. Finally, verify the condition of the exhaust system, catalytic converter, and emissions controls, as these frequently fail silently before MOT testing. The absence of advisories in prior tests doesn’t guarantee these areas are sound, so visual and functional checks are essential.