2006 Mercedes-Benz Sprinter 2.2L Diesel · FN06 AGX

The vehicle shows an improving maintenance trend, transitioning from a history of recurring mechanical and structural issues to a clean status in its most recent inspections. The April 2025 test at 94,222 miles resulted in a pass with no defects recorded, following a clean pass in April 2024. This recent stability suggests that previous issues with lighting and braking systems have been addressed and the vehicle is currently maintaining a consistent standard of roadworthiness. The mileage profile is notably low for a 2006 vehicle, averaging approximately 4,711 miles per year. A significant period of inactivity is evident between the April 2013 test at 76,154 miles and the April 2014 test at 86,623 miles, where the vehicle covered over 10,000 miles in a single year. Following this, the mileage accumulation slowed significantly, with the vehicle covering only about 7,500 miles between July 2022 and April 2025. This pattern of low annual usage often indicates long periods of standing, which can lead to component degradation despite low mechanical wear. A prospective buyer should conduct a thorough physical inspection of the chassis and braking system. The history shows a persistent pattern of corrosion affecting the brake pipes and vehicle structure, specifically noted in the July 2016 and August 2017 tests. Although the most recent records are clear, the age of the vehicle makes it vital to check for hidden rust on the subframe and nearside/offside brake lines. The 2012 report also flagged a damaged offside front subframe and an oil leak, so the integrity of the engine mounts and the underside of the engine bay requires close scrutiny. Suspension components also warrant attention. The record shows repeated failures regarding play in suspension arm ball joints and anti-roll bar linkages between 2012 and 2016. While the recent passes suggest these have been replaced or repaired, the low mileage and potential for long periods of inactivity mean rubber bushes and seals may have perished due to age rather than wear. Inspecting the condition of all suspension bushes and checking for any signs of binding or uneven brake disc wear will be essential to confirm the long-term reliability of the braking and steering systems.