1989 Rolls Royce Silver Spirit 6.8L Petrol · G661 KRH
1989 Rolls Royce Silver Spirit (6.8L, petrol). First registered 22 Aug 1989. Recorded mileage 90,047 miles. MOT expired on 28 May 2026.
- Make & Model
- ROLLS ROYCE SILVER SPIRIT
- Year / Origin
- 1989 · Maidstone
- Safety Recall
- Unknown
- MOT Status
- Expired on 28 May 2026
- Road Tax
- —
- Recorded Mileage
- 90,047 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 6.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
G661 KRH Key Findings
- 3 MOT tests recorded
- Latest MOT passed on 30/05/2025
- 90,047 miles recorded at latest MOT
- No defects recorded at the latest MOT
- Recurring tyres items (2 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
G661 KRH MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
3 MOT tests are recorded for this 1989 Rolls Royce Silver Spirit (G661 KRH) between October 2022 and May 2025.
The record contains 3 passes and 0 failures.
The record shows no MOT failures, although 3 advisory notices note items to monitor.
Across all tests, the most frequently flagged areas are: Tyres (2 issues), Exhaust & Emissions (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 3 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
G661 KRH Mileage History
- 04/10/202288,190 mi
- 09/05/202489,092 mi+902 mi
- 30/05/202590,047 mi+955 mi
Average of roughly 700 miles per year across 3 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Rolls-Royce Rolls-Royce Silver Spirit
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: ROLLS ROYCE SILVER SPIRIT
Known issues reported by owners and MOT testers.
- High-Pressure Hydraulic Braking Accumulator and Mineral Oil System Failure(Serious)
The SZ generation employs a complex Citroën-licensed dual-circuit hydraulic system operating at over 2,000 psi to power the braking system and rear self-levelling suspension. The nitrogen-charged brake accumulator spheres lose pressure over 5 to 8 years, resulting in a rock-hard brake pedal, prolonged pump cycle times, and reduced reserve braking capacity. If brake fluid types are mistakenly interchanged (such as adding standard DOT fluid into mineral oil systems), internal rubber seals dissolve, triggering catastrophic system failure.
- Rear Hydraulic Suspension Gas Sphere Deterioration and Ride Harshness(Moderate)
The hydropneumatic rear self-levelling suspension relies on two nitrogen-filled gas spring spheres connected to rear hydraulic struts to provide spring compliance and damping. Over time, nitrogen gas permeates across the internal rubber diaphragm, reducing the gas volume until the sphere hydraulically locks solid. This eliminates rear suspension compliance, transmits harsh road shocks directly into the monocoque body, and causes rapid failure of rear subframe bushes and lower shock absorber mountings.
- Exhaust Manifold Cracking and Gasket Blow-By(Moderate)
The 6.75-litre L-Series V8 produces substantial thermal load within a heavily enclosed engine compartment. Over thousands of heat cycles, the cast-iron exhaust manifolds warp and stress their mounting studs, causing the composite manifold gaskets to blow out or the cast manifolds to develop hairline fatigue fractures. Remediation requires extracting seized or snapped studs from the aluminium cylinder heads in extremely tight engine bay clearances, demanding substantial specialist labour.
Vehicle & Plate History
Previous plates for this vehicle
Similar Vehicles
Plate Neighbors
Batch Registration Neighbors (G661 Series)
Vehicles registered in the same regional DVLA batch as G661KRH.
CALTHORPE
HONDA
CB450
FORD
SIERRA SAPPHIRE
PEUGEOT
205
HONDA
CBR400
TOYOTA
STARLET
PEUGEOT
205
TALBOT
EXPRESS
LAND ROVER
DEFENDER
ROVER
MINI
VOLVO
700 Series
RENAULT
TRAFIC
ROLLS ROYCE SILVER SPIRIT Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1989 model year cars.
- High-Pressure Hydraulic Braking Accumulator and Mineral Oil System FailureSerious
The SZ generation employs a complex Citroën-licensed dual-circuit hydraulic system operating at over 2,000 psi to power the braking system and rear self-levelling suspension. The nitrogen-charged brake accumulator spheres lose pressure over 5 to 8 years, resulting in a rock-hard brake pedal, prolonged pump cycle times, and reduced reserve braking capacity. If brake fluid types are mistakenly interchanged (such as adding standard DOT fluid into mineral oil systems), internal rubber seals dissolve, triggering catastrophic system failure.
- Rear Hydraulic Suspension Gas Sphere Deterioration and Ride HarshnessModerate
The hydropneumatic rear self-levelling suspension relies on two nitrogen-filled gas spring spheres connected to rear hydraulic struts to provide spring compliance and damping. Over time, nitrogen gas permeates across the internal rubber diaphragm, reducing the gas volume until the sphere hydraulically locks solid. This eliminates rear suspension compliance, transmits harsh road shocks directly into the monocoque body, and causes rapid failure of rear subframe bushes and lower shock absorber mountings.
- Exhaust Manifold Cracking and Gasket Blow-ByModerate
The 6.75-litre L-Series V8 produces substantial thermal load within a heavily enclosed engine compartment. Over thousands of heat cycles, the cast-iron exhaust manifolds warp and stress their mounting studs, causing the composite manifold gaskets to blow out or the cast manifolds to develop hairline fatigue fractures. Remediation requires extracting seized or snapped studs from the aluminium cylinder heads in extremely tight engine bay clearances, demanding substantial specialist labour.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.