2015 FORD FOCUS1.0L Petrol

This 2015 Ford Focus has demonstrated a stable roadworthiness trend over its MOT history, with no defects or advisories recorded across the most recent five tests. The January 2026 retest—conducted just days apart—confirms the vehicle passed without failings, suggesting either a genuine absence of critical issues or a well-maintained example. However, the lack of advisories or minor defects in any test implies the tester did not identify any recurring wear patterns, such as worn suspension bushes, binding calipers, or excessive corrosion, which would typically warrant further attention. That said, the double retest in early 2026 is unusual and may warrant questioning whether the vehicle was recently serviced or inspected privately before the MOT cycle. Mileage progression shows consistent usage, averaging around 7,800 miles annually, which aligns with typical wear expectations for a vehicle of this age. The gaps between tests—approximately 12 months—are standard, with no abrupt jumps or prolonged periods of inactivity that might suggest neglect or extended storage. The most recent test at 85,879 miles in January 2026 places the vehicle just over 5,000 miles shy of its current odometer reading, indicating it has likely been driven since then without further MOT scrutiny. This suggests the vehicle remains in active use, though the buyer should verify whether any private maintenance or servicing has been undertaken in that interval. Given the absence of recorded defects, the primary focus for an in-person inspection should centre on components that commonly fail without MOT failings but still pose long-term risks. The suspension—particularly the coil springs, bushes, and track rods—should be examined for uneven wear, perishing, or binding, as these often degrade gradually without triggering a fail. Brake discs and pads, while not flagged, may require assessment for uneven thickness or glazing, especially if the vehicle has been driven hard since the last test. Structural integrity is another critical area; check for corrosion at wheel arches, sills, and the subframe, as rust can compromise safety without immediate MOT consequences. Finally, the exhaust system should be inspected for leaks or excessive corrosion, particularly around joints, as emissions-related issues are not always caught in basic MOT tests.