2010 Audi Q5 2.0L Petrol · RK60 AAK

The vehicle is currently roadworthy but the maintenance history reveals a pattern of reactive rather than preventative care. While the most recent MOT test in June 2024 at 97,640 miles passed, it followed a significant failure just two weeks prior. The trend shows persistent issues with oil leaks and lighting defects that have appeared in almost every test since 2022. The presence of an engine malfunction indicator light failure in May 2024 suggests the owner only addresses critical mechanical faults once they threaten an MOT pass. At 97,640 miles over 16 years, the Audi has averaged approximately 6,100 miles per year, which is consistent with low-to-moderate annual usage. The mileage accumulation between tests is steady, with roughly 7,600 miles covered between May 2022 and May 2023, and another 6,600 miles between 2023 and 2024. This low annual mileage often explains why rubber-based components like suspension bushes perish prematurely despite the relatively low distance driven. A buyer must prioritize inspecting the front drivetrain and suspension system. The tester flagged split CV boots in the 2024 failure, which, if not replaced, lead to rapid joint failure. Recurring reports of worn suspension arm bushes since 2022 indicate that the front end geometry is degrading, potentially affecting handling precision. Furthermore, the braking system requires close attention; the 2023 record noted imbalanced rear brakes that barely met legal requirements, suggesting sticking calipers or worn mechanisms that need professional investigation to prevent uneven wear. The persistent oil leak noted since 2023 warrants a thorough under-body inspection to determine if it is a minor valve cover leak or a more significant gasket failure. Given the history of damaged tyre sidewalls and exposed cords, the previous owner has neglected basic consumable maintenance until forced by a failure. Verify the current state of all tyres and ensure that the engine management system has been properly cleared and is functioning correctly following the reported failure.