2022 Hyundai Ioniq 1.6L Hybrid electric (clean) · S20 ELT

A consistent record of roadworthiness is evident for this vehicle, which has maintained a clean passing history with no recorded defects in its most recent inspection on 2026-10-20. While the 2025-10-21 test flagged advisories regarding tyre wear on both the nearside and offside front tyres, the absence of any reported failures or further advisories in the latest test suggests that these consumables were addressed and that the vehicle is currently meeting all statutory safety requirements. The recorded mileage of 34,977 miles over approximately four years indicates a usage pattern of roughly 8,744 miles per year, which aligns with typical UK average driving distances. This moderate level of annual accumulation suggests that mechanical components such as the suspension bushes, brake discs, and drivetrain elements have been subjected to regular, standard operational wear rather than the accelerated degradation associated with high-mileage commercial use or the potential stasis-related issues found in vehicles that sit idle for extended periods. Prospective buyers should pay specific attention to the front tyre condition noted in the previous year's advisory. Because the 2025 report highlighted tyres worn close to the legal limit and specifically noted uneven wear on the edges, it is important to inspect the current tread depth and profile of the front tyres. During a test drive, pay close attention to the steering response and check for any pulling to one side or a wandering sensation at motorway speeds, as uneven edge wear can sometimes be a symptom of incorrect wheel alignment or worn suspension components. In addition to checking the tyre tread, a physical inspection of the front suspension geometry is advisable to ensure the previous tyre wear issues were not caused by underlying mechanical faults. Listen for any rhythmic knocking or clunking sounds when traversing uneven surfaces or turning the steering wheel at low speeds, which could indicate wear in the control arms or steering linkages. Ensuring that the steering feels centered and that there is no vibration through the steering wheel or brake pedal will help confirm that the recent passing result reflects a stable mechanical state.