2013 BMW 1162.0L Diesel

This BMW 116 demonstrates a consistent roadworthiness profile, with every MOT test since 2022 passing without defects or advisories. The most recent inspection on 2026-01-06 at 152,452 miles confirms no outstanding mechanical or structural issues, reinforcing a stable maintenance pattern over the past four years. The absence of recurring faults suggests that major components—such as suspension bushes, coil springs, binding calipers, or exhaust emissions—have either been properly serviced or exhibit minimal wear. However, the lack of advisories does not preclude hidden wear; a thorough in-person inspection remains essential to verify conditions like brake disc thickness, steering rack fluid leaks, or underbody corrosion. The mileage progression of approximately 11,700 miles annually aligns with typical usage for a vehicle of this age, with no abrupt spikes or prolonged stagnation. The recorded mileage increments—ranging from 13,779 miles between tests in 2024 to 14,919 miles in 2025—indicate steady driving habits without evidence of neglect or excessive wear. The most notable gap is between the 2022 and 2023 tests, where mileage increased by 13,554 miles in under a year, but this remains within reasonable bounds for a well-used vehicle. There is no indication of extended periods off the road, which could have allowed for accelerated corrosion or fluid degradation. Given the clean MOT history, priority should be given to inspecting high-wear items that are not routinely tested. The brakes, though never failed, may require verification of disc thickness and caliper binding, particularly if the vehicle exhibits uneven stopping. Suspension components—front and rear bushes, ball joints, and shock absorbers—should be checked for excessive play or fluid leaks, as these are not always captured in standard MOT checks. Corrosion is another critical factor; the underbody, wheel arches, and subframe should be examined for rust penetration, especially in areas prone to salt damage. Finally, the engine bay should be inspected for fluid leaks (coolant, power steering, or oil) and the integrity of hoses and belts, as these are not MOT-tested but can pose silent failure risks. The absence of advisories does not guarantee these areas are flawless.